About The Position

The Controls & Refrigeration Systems Specialist (Building Automation Technician) is primarily responsible for operating and maintaining HVAC-R automation systems and other controls systems. The position works with the Building Automation System (BAS) and calibrates, diagnoses, repairs, and replaces Direct Digital Control (DDC) controls and pneumatic, electro-mechanical, and electronic components. It also assists other trades with diagnosis, repair, and replacement of system components. The role operates Metasys Extended Architecture BAS programs and legacy Metasys PMI functions to diagnose equipment issues and respond to customer requests, construction and maintenance needs, equipment failures, power limitations, planned and unplanned events, and emergencies. The specialist works directly with customers to troubleshoot HVAC and controls issues, explains BAS operation and local control limitations, monitors connected spaces and equipment, and initiates responses to alarms and failures. Under supervision, the specialist adjusts set-points and parameters, programs schedules and alarms, applies overrides, modifies or repairs BAS programming, and adds hardware points. The position maintains and repairs pneumatic and electro-mechanical control components, BAS field and supervisory controllers, and related equipment. It supports other trades with HVAC, refrigeration, chiller, electrical, plumbing, pump, and mechanical work, and assists with maintenance of equipment not integrated into the BAS. Duties also include maintaining and calibrating chemical fume hoods, operating a motor vehicle to work sites, and providing excellent customer service. This is an onsite, full-time position in Amherst, scheduled Tuesday through Saturday from 7:00 AM to 3:00 PM. It is designated as essential and subject to on-call responsibilities, overtime, return-to-work requirements between scheduled shifts, and reporting during delays, early departures, and closures.

Requirements

  • Valid Class D driver’s license.
  • Ability to read and interpret blueprints, control schematics, wiring diagrams, and ladder logic diagrams.
  • Knowledge and experience with safety practices, preventive maintenance, and standard testing equipment.
  • Knowledge and experience with cooling equipment, including chillers and Direct Expansion (DX) systems.
  • Knowledge of campus HVAC building-control systems, including air-handling, hydronic, and cooling systems, and pneumatic, electronic, and software-controlled systems.
  • Ability to diagnose and repair HVAC equipment and control systems.
  • Ability to function independently under routine and/or emergency conditions.
  • Effective written and oral communication skills.
  • Experience with computer application programs such as Word and Excel.
  • Ability to cooperate with other skilled craftspeople in a team environment.
  • Must obtain a Metasys Facility Operator’s Certificate within six months of hire.
  • At least one of the following: an HVAC training certificate from an accredited school and three years of HVAC/R experience using related DDC controls; a Johnson Controls Metasys or equivalent BAS training certificate and three years of such experience; a valid Refrigeration Technician license and three years of such experience; a Journeyman Plumber or Electrical license and three years of experience including substantial HVAC/R experience; or an associate’s degree or higher in an HVAC- or DDC-related technical discipline and three years of such experience. Experience is preferably in industrial, commercial, or institutional operations.
  • Must wear university clothing when supplied.
  • Must be available for on-call responsibilities and overtime, return to work between scheduled shifts when directed, and report during delays, early departures, and closures; responsible for keeping the service desk informed of a current phone number.
  • Must submit a resume with the application and be prepared to provide contact information for three professional references.

Nice To Haves

  • Experience in higher education.
  • Safety-related training in mechanical, electrical, plumbing, painting, carpentry, and other schedulable trades.
  • Ability to functionally supervise and instruct apprentices.
  • HVAC certificate from a trade school.
  • Confined-space training.
  • Asbestos awareness.
  • Entry-level thermography training.
  • OSHA 10 training.

Responsibilities

  • Operate Metasys Extended Architecture BAS programs and legacy Metasys PMI functions to analyze and diagnose equipment issues and respond to customer requests, maintenance and construction needs, failures, power limitations, planned and unplanned events, and emergencies.
  • Work directly with customers to troubleshoot HVAC and controls issues and explain BAS operation, local controls, and their limitations.
  • Monitor BAS-connected spaces and equipment for trouble, failures, and alarms, and initiate responses to resolve issues.
  • Under supervision, adjust BAS equipment set-points and parameters to improve performance and respond to changing conditions and customer needs.
  • Under supervision, program and adjust equipment schedules and alarms, apply overrides as needed, diagnose equipment and sensors, and follow sequences of operation.
  • Maintain, calibrate, diagnose, repair, and replace pneumatic system components, including actuators, thermostats, PE and EP devices, pilot positioners, solenoid air valves, flow restrictors, gauges, piping, and tubing.
  • Maintain, calibrate, diagnose, repair, and replace electric actuators, thermostats, sensors, transducers, flow meters, position-prove switches, freeze-stats, fuses, power supplies, and associated electro-mechanical devices.
  • Maintain, calibrate, diagnose, re-program, and replace BAS field controllers, including DX-9100, FEC, FAC, IOM, and application-specific AHU, UNT, VAV, and VMA controllers.
  • Monitor supervisory controllers, including NCMs, NCEs, and NAEs, for low-battery and other alarms; replace batteries and reboot controllers.
  • Troubleshoot existing BAS programming and, under supervision, modify or repair programming using GX-9100, HVACPRO, CCT, and LCT.
  • Under supervision, add new BAS hardware points for equipment in small renovations and to improve the operation of existing equipment.
  • Lead and support other trades in control-system installation, operation, and maintenance.
  • Support electricians in diagnosing, repairing, and replacing HVAC line-voltage electrical components, including variable speed drives.
  • Support HVAC mechanics in diagnosing, repairing, and replacing belts, dampers, and other HVAC and air-compressor mechanical components.
  • Support refrigeration and chiller mechanics in diagnosing issues, clearing package control faults, restarting equipment, and maintaining and repairing chillers and refrigeration equipment, including pneumatic air dryers.
  • Support plumbers and pump mechanics in diagnosing, repairing, and replacing valves and other steam, hot-water, and chilled-water system components.
  • Support Physical Plant and contractor maintenance and repair by starting, stopping, and ramping equipment for planned and emergency service interruptions.
  • Maintain and repair chemical fume hoods and regularly test and calibrate their face velocity.
  • Assist with programming troubleshooting, maintenance, and repair of automatic equipment not integrated into the BAS, including RO and pure-water systems, domestic-water booster systems, stand-alone ventilation equipment, and lighting-control systems.
  • Operate a motor vehicle to travel to work sites.
  • Practice and promote excellent customer service and respond to diverse customer needs.
  • Perform other duties as assigned.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service