CNC Programmer

ASSA ABLOY•Santa Clarita, CA
•$65,843 - $103,468•Onsite

About The Position

The CNC Programmer independently develops, maintains, improves, and proves out CNC programs for new and existing parts, including parts transitioning to new equipment. The role defines machining sequences, tool lists, workholding requirements, and setup instructions; verifies physical setups prepared by production machinists; performs initial machine execution and program prove-outs; inspects first parts; and troubleshoots machining and programming issues. The position supports reliable daily production and improves quality, tool life, cycle time, and process reliability. This is a hands-on role combining computer-based programming with machine prove-outs, inspection, and production troubleshooting in an onsite manufacturing facility. Programming uses a dedicated laptop-based CAD/CAM workstation, including SolidWorks and SolidCAM or other applicable systems. The laptop is taken to equipment during execution, prove-out, and troubleshooting. The role supports Haas vertical and horizontal machining centers, CNC lathes, and mill-turn equipment, with particular technical emphasis on four-axis milling and relevant mill-turn and 3+2 machining applications. Materials include aluminum, brass, 304 and 17-4 stainless steel, and bronze. Parts are programmed to drawing requirements; typical PACLOCK tolerances are approximately ±0.003 inch. The CNC Programmer reports to the Production Manager and receives technical training and dotted-line support from the General Manager. The employee must complete training in PACLOCK’s programming, setup-verification, and prove-out methods and demonstrate proficiency before working independently within the approved scope. The position requires disciplined safety practices, accurate production documentation, prompt communication, and coordination with production leadership, Engineering, production machinists, and the General Manager. Work is performed onsite Monday through Friday at the Valencia, California manufacturing facility. The normal schedule is approximately eight hours per day and 40 hours per week; occasional additional hours may be needed to complete agreed priorities, coordinated with management and handled under company policies.

Requirements

  • Strong practical knowledge of CNC machining and programming principles.
  • Working knowledge of CNC program structure, G-code and M-code, and the relationship between programmed commands and machine motion.
  • Strong practical understanding of four-axis milling, with relevant knowledge of mill-turn and 3+2 machining.
  • Sound judgment regarding tool selection, workholding, offsets, clearances, cutting conditions, and safe machine operation.
  • Ability to develop and maintain CNC programs for new and existing production parts.
  • Ability to define machining sequences, tool lists, workholding requirements, and setup instructions.
  • Ability to verify machine setups and safely perform initial machine execution and program prove-outs.
  • Ability to select and refine tooling, cutting parameters, and machining strategies to improve quality, tool life, cycle time, and process reliability.
  • Ability to read engineering drawings, interpret tolerances, and inspect machined parts using appropriate measuring equipment.
  • Ability to recognize machining and programming problems, investigate causes, and implement effective corrective actions.
  • Strong shop mathematics, spatial reasoning, attention to detail, and systematic problem-solving skills.
  • Ability to maintain accurate production records, including setup sheets, tool lists, inspection notes, and program revision histories.
  • Willingness to learn established procedures, accept feedback, ask questions, and communicate concerns clearly.
  • Ability to work effectively with production machinists, production leadership, Engineering, and the General Manager.
  • Ability to communicate progress and obstacles promptly, take ownership of agreed deadlines, and deliver complete, production-ready work.
  • Ability to use a laptop and CAD/CAM software in a manufacturing environment.
  • Demonstrated aptitude for CNC programming and ability to learn PACLOCK programming methods; no degree, certification, or fixed minimum years of experience is required.
  • Demonstrated experience reading engineering drawings, interpreting tolerances, and inspecting machined parts using appropriate measuring equipment.
  • Successful completion of a computerized technical assessment and an in-person practical assessment alongside the General Manager as part of the selection process.
  • Ability to comply with shop safety procedures and use required personal protective equipment.

Nice To Haves

  • Advanced CNC programming experience.
  • Experience using SolidWorks and SolidCAM; experience with other CAD/CAM systems will also be considered.
  • Relevant experience supporting mill-turn and 3+2 machining applications.
  • Fixture and workholding design may become a development opportunity as business needs and demonstrated capability evolve.

Responsibilities

  • Develop and maintain CNC programs for new parts, existing production parts, and parts transitioning to new equipment.
  • Define machining sequences, tool lists, workholding requirements, and setup instructions using existing workholding solutions.
  • Select and refine tooling, cutting parameters, and machining strategies to improve quality, tool life, cycle time, and process reliability.
  • Verify that physical machine setups prepared by production machinists match program requirements before executing new or revised programs.
  • Personally perform initial machine execution and prove-out of new programs in accordance with PACLOCK procedures.
  • Inspect first parts and confirm with the production team that they meet applicable drawing, tolerance, and quality requirements before production release.
  • Identify and resolve issues during program prove-out to support safe, reliable production transitions.
  • Troubleshoot machining and programming problems, including dimensional variation, tool wear, surface finish, and inefficient cycles; investigate causes and implement corrections.
  • Partner with the General Manager on particularly difficult machining or programming issues.
  • Work with Engineering to identify part features or designs that could be improved for manufacturability, quality, or machining efficiency.
  • Maintain setup sheets, tool lists, inspection notes, program revision histories, and other required production records.
  • Coordinate priorities, machine availability, and program handoffs with the Production Manager, Engineering, production machinists, and General Manager.
  • Communicate progress, delays, and obstacles promptly; take ownership of agreed deadlines and deliver production-ready programs and documentation.
  • Complete technical training in PACLOCK programming, setup-verification, and prove-out methods, and demonstrate proficiency before independently working within the approved scope.
  • Follow safe setup-verification and prove-out practices; stop and resolve uncertain or unsafe conditions, avoid bypassing required checks, and promptly report errors, unexpected machine behavior, and near misses.
  • Perform other duties and responsibilities as assigned based on business needs.

Benefits

  • Paid time off, including sick and vacation days.
  • 12 paid holidays.
  • Job-protected leave benefits in accordance with applicable law.
  • Medical, dental, vision, and life insurance.
  • Supplemental critical illness, hospital, accident, and indemnity coverage available for purchase.
  • Health and flexible savings accounts, subject to eligibility requirements.
  • 401(k) plan with employer contributions and matching, subject to plan eligibility requirements.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service