Chief Electrician

ABM•Phoenix, AZ

7d•Onsite

About The Position

The Chief Electrician is responsible for installing, repairing, maintaining, and testing commercial, industrial electrical systems, and Electric Vehicle Charging Stations (EVCS). This role involves using industry-related tools, working with various electrical systems including low and high voltage, and ensuring adherence to safety protocols. The position requires effective communication with team members and supervisors, the ability to interpret electrical drawings, and perform duties as required by the changing business environment.

Requirements

Minimum 5 years overall experience after obtaining the Journeyman Certification/License.
At least 2 years’ experience with EVCS.
Knowledge of National electrical codes, NFPA codes specially NFPA 70, 70B, 70E 72 and all related uniform building codes and international building codes.
Training of NFPA 70E, PPE, Electrical safety procedures & processes.
Demonstrated ability to read/interpret drawings and wire diagrams.
Possesses working knowledge/understanding of Electrical Code (both local and IEEE) as it applies to controls.
Experienced in scope determination of installation materials.
Must respond to, and address, callouts, and emergencies (within 1 hour) during and after regular business hours including after dark hours, which require carrying a communication device when on rotational call.
Job planning and prioritizing with a strong client focus.
Ability to work with a team, take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules.
Knowledge of Lock/Tag Out Protocol, OSHA, and other Electrical safety procedures.
Be available for shift work when applicable.
Must be able to frequently climb to and work from elevated platforms, excavated areas, ladders, stairwells, walkways, articulating lifts, etc.

Nice To Haves

May be required to achieve and maintain other certifications as required to perform job duties.
May work in low-lit areas.

Responsibilities

Install, repair, maintain, and test commercial, industrial electrical systems and EVCS.
Use industry-related hand tools and power tools.
Measure, cut, bend, thread, etc. and install wire and electrical cable systems, conduit systems and other wire raceway systems.
Repair, maintain, trouble shoot and inspect Building Electrical systems, EVCS and all related System.
Install, repair, maintain, and test other electrical systems such as Fire Life safety systems, PA systems, Security systems, Control systems, Robotic systems, Micro Grids, and related systems.
Work on low voltage and high voltage system as per authorization and level of trainings & certifications.
Feed to pull into, and terminate wire and cable within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc.
Splice and terminate wires at junction points.
Troubleshoot equipment electrical systems and control circuits and build control panels from drawings.
Prepare sketches and schematic diagrams showing the location of wiring and electrical systems.
Work on Emergency generators, Power distribution Units (PDU), Uninterrupted Power Supply Systems (UPS), DC Batteries, Automatic Transfer Switches (ATS) and related systems.
Develop, review, and execute Electrical Safety Job Plans, Job safety Analysis (JSA) and Job Hazard analysis (JHA).
Communicate effectively with facility team member, engineering team members & supervisors.
Adhere to all NEC, NFPA, NFPA 70 B NFPA 70E OSHA Local, state, federal and building owner’s safety procedures and protocols.
Read, interpretation, review and analysis of electrical drawings, sketches, line diagrams, etc.
Does progressively more difficult work and accepts more responsibility while learning the job, ultimately doing the work required as per changing business environment.
Performs other duties as required.