Cabinet Builder III

Greenpoint Technologies • San Antonio, TX

1d • Onsite

About The Position

Builds high-end aircraft cabinetry using a variety of veneers, laminates and composite materials in a timely and efficient fashion ensuring quality standards are attained. Provides training to cabinet builders.

Requirements

• Minimum of high school diploma or equivalent.
• Minimum of four years aircraft cabinetry experience.
• Ability to lead and motivate team members towards project objectives.
• Ability to share lessons learned and company processes and procedures with new employees.
• Ability to share applicable knowledge and effectively train others.
• Ability to effectively communicate with all levels of employees.
• Ability to communicate in English (read, write, and verbally communicate).
• Mathematical knowledge and ability to apply towards problem solving using decimals and fractions.
• Ability to identify and operate proper tools for the task assigned.
• Exhibits hand-eye coordination skills.
• Ability to identify application characteristics of adhesives and epoxies.
• Ability to read measuring instruments.
• Ability to correctly label parts for re-assemble.
• Ability to build shop aids.
• Ability to fabricate small sheet metal parts (angles, clips, brackets, etc.)
• Ability to manufacture items needed for final assembly adjustments (shims, blocks, etc.)
• Ability to work independently and cross-functionally as part of an established and growing team.
• Strong communication and problem-solving skills.
• Strong time management and organizational skills.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
• Able to comply with DOT/FAA Drug and Alcohol Testing Program.
• Able to climb and work on step stools and/or ladders.
• Able to lift 25 lbs. without assistance/able to lift up to 100 lbs. with assistance.
• Able to reach overhead.
• Able to work in a non-dust-free environment.
• Normal or corrected vision (required to perform exacting tasks).
• Full range of motion with both hands.
• Can work in a stooping, kneeling, or standing position and in cramped areas.
• Minimum required tools must be obtained within 6 months after initial employment.
• Tool Box
• Small Hammer
• Awl
• Calculator
• Chisel Set (1/8" to 1")
• Pliers (regular & needle nose)
• Putty knife
• Scale (24-inch flex in 16R grads.)
• Scale (6 inch in 16R grads.)
• Screwdriver (Straight)
• Screwdriver (Phillips #1 & # 2)
• Square (12" & 24" Combo in 6R)
• Tape Measure (10')
• Dec/Frac
• Utility Knife
• Crescent Wrench (Small &/or Med)
• Allen Wrenches (Small Set)
• Wire Cutters
• Nut Driver Set
• Tap Set
• Calipers
• Punch, Center
• Vise Grips (small)
• Flashlight
• Offset Screwdriver (90 Degree)
• Socket Set
• 90 Degree Die Grinder
• Straight Die Grinder
• Trim Router
• Angle Drill Motor
• Semco Sealant Gun
• Large Hand Router
• Riu Nut Puller
• Rivet Gun
• Spray Gun (Contact Glue)
• Hand Tools (Small Electric and Pneumatic)
• Sander, Pneumatic or Electric (Handheld)
• Router, (Hand Router, Table Router)
• Press, Drill
• Surface Sander, (Drum Sander)
• Sander, (Disc, Spindle)
• Saw, (Band Saw)
• Saw, (Table Saw, Sliding Table Saw, Panel Saw)
• Planer/Jointer
• Chop Saw

Nice To Haves

• Angle Drill suggested but not required
• Cordless Drills
• pneumatic Drills

Responsibilities

• Supports the mentorship and training of the cabinet builders.
• Reads, interprets, and analyzes customer specification documents.
• Reads and interprets engineering drawings.
• Works with aerospace materials consistently.
• Bonds hinge blocks into panels, set doors, drawers, etc.
• Fabricates hardwood bullnose, Corian counter tops.
• Prepares kerf and fiberglass panels.
• Applies adhesives and epoxies to materials.
• Builds drawers and cabinets on large monuments.
• Applies and works with veneer on product.
• Lays out and routes for switches, cup holders & inlays.
• Installs inlays.
• Lays out and cuts materials on the table saw.
• Operates CNC and Pin Router.
• Wears safety equipment as required and practices safety guidelines/procedures, including Hazardous Materials guidelines.
• Produces a quality product consistently.
• Interprets scheduling requirements to makes adjustments as needed.
• Properly maintains shop tools and equipment.
• Maintains a neat, organized work area and help with the general daily housekeeping of the department.
• Meets target hours and completes schedules as set by Supervision.
• Trains and instructs others.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

Benefits

• We welcome diverse contributions and provide equal employment opportunities to all individuals without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED