About The Position

The Aviation NDT Level III / Chief Inspector serves as PROtect’s designated Aviation NDT Level III and Chief Inspector for its FAA Part 145 Repair Station. The role is PROtect’s primary technical authority for Ultrasonic Testing (UT), Eddy Current Testing (ET), Penetrant Testing (PT), and Visual Testing (VT), and may include other general NDT responsibilities under the company’s Quality Program. The position ensures that NDT personnel, procedures, techniques, training, qualifications, certifications, equipment, calibration, technical data, and inspection records comply with NAS 410, PROtect’s Written Practice, applicable FAA regulations, OEM requirements, customer specifications, and approved Repair Station procedures. It provides final technical guidance on complex inspection requirements and serves as a technical escalation point for procedure interpretation, technique development, equipment selection, inspection discrepancies, and personnel qualification matters. As Chief Inspector, the role oversees Repair Station inspection and quality-control functions, ensuring work under the FAA Part 145 certificate follows applicable regulations, approved manuals, current technical data, customer requirements, and company procedures. The position combines technical, quality, and regulatory leadership, with authority over NDT technical matters, personnel qualification, inspection compliance, and Chief Inspector functions. Routine workforce scheduling and daily production management remain operational responsibilities. The role supports PROtect’s Aviation Services Division through technical leadership, personnel qualification and development, procedure and technical-data control, audits and corrective actions, customer support, and FAA readiness and continued compliance. It may directly support field inspections, customer activities, technician evaluations, audits, and regulatory activities when Level III or Chief Inspector involvement is required. Travel of up to 25%–40% may be required.

Requirements

  • Current NAS 410 Level III qualification and certification under PROtect’s approved Written Practice in UT, ET, PT, and VT.
  • A minimum of 7 years of progressive Aviation NDT experience, including aircraft, component, or aerospace inspection.
  • A minimum of 7 years of experience as an NDT Level III with direct technical responsibility for UT, ET, PT, and VT.
  • Demonstrated knowledge and experience administering NAS 410 personnel qualification and certification requirements.
  • Demonstrated experience developing and approving NDT procedures and techniques.
  • Experience administering or overseeing technician training, examinations, qualification, and certification.
  • Strong working knowledge of NAS 410 personnel qualification and certification requirements.
  • Strong understanding of FAA Part 145 Repair Station inspection and quality-control requirements.
  • Experience reviewing OEM aircraft maintenance manuals, NDT manuals, service bulletins, engineering orders, drawings, and customer specifications.
  • Experience with aviation NDT equipment, reference standards, calibration requirements, inspection records, and technical documentation.
  • Demonstrated ability to mentor and technically develop Level II personnel.
  • Strong technical knowledge of UT, ET, PT, and VT inspection methods and aviation applications.
  • Ability to interpret NAS 410, FAA regulations, OEM requirements, technical data, drawings, procedures, and customer specifications.
  • Strong written and verbal communication skills; ability to develop clear, technically accurate procedures, training materials, and inspection documentation.
  • Ability to provide technical leadership and make sound Level III decisions, and to communicate effectively with technicians, customers, Quality personnel, management, FAA representatives, and OEM technical personnel.
  • Ability to conduct and support technical audits and compliance reviews, and provide guidance, coaching, training, and technical mentorship.
  • Strong organizational and documentation-control skills; proficiency with Microsoft Office and electronic quality/documentation systems.
  • Ability to travel as required; the posting specifies travel of up to 25%–40%.
  • Meet the near-vision acuity and color-perception requirements of NAS 410 and PROtect’s Written Practice, including periodic vision examinations.
  • Ability to work in hangar, shop, and field environments, including lifting, climbing, and working in confined spaces, with or without reasonable accommodation.
  • FAA Mechanic Certificate, FAA Repairman Certificate, or another qualification applicable to the approved Chief Inspector position, as required by PROtect’s approved Repair Station structure.

Nice To Haves

  • Associate of Applied Science in Nondestructive Testing, Aviation Maintenance Technology, Engineering Technology, or a related technical discipline.
  • ASNT NDT Level III certification in UT, ET, PT, and/or VT as supplemental evidence of technical competency.
  • Additional OEM approvals, aviation-specific NDT certifications, advanced ultrasonic qualifications, or aircraft inspection experience.
  • Prior experience serving as an Aviation NDT Level III, Chief Inspector, Quality Manager, or similar technical authority within an FAA Part 145 Repair Station.

Responsibilities

  • Serve as PROtect’s designated Aviation NDT Level III for UT, ET, PT, and VT in accordance with NAS 410 and the approved Written Practice.
  • Develop, review, approve, and maintain NDT procedures, techniques, work instructions, and method-specific documentation within qualified methods.
  • Interpret OEM manuals, service bulletins, engineering instructions, customer specifications, industry standards, and applicable FAA requirements.
  • Provide Level III technical guidance and final interpretation for escalated inspection requirements, acceptance criteria, and procedural questions.
  • Evaluate NDT techniques, equipment, probes, reference standards, and inspection technologies for potential implementation.
  • Provide technical support for aircraft, component, structural, and maintenance-related NDT applications.
  • Administer and maintain the Aviation NDT Written Practice and establish personnel qualification and certification requirements.
  • Review technician education, training, experience, on-the-job training, examination, and certification records for compliance.
  • Develop, approve, administer, or oversee general, specific, and practical examinations as required by the Written Practice.
  • Approve initial certification, recertification, suspension, revocation, and reinstatement of NDT personnel qualifications.
  • Maintain complete, current, and auditable personnel qualification and certification records, and ensure personnel are authorized only for demonstrated competencies.
  • Develop aviation-specific training content, modules, practical exercises, examinations, and competency assessments for UT, ET, PT, and VT.
  • Support classroom, online, practical, and on-the-job training; provide instruction, mentorship, and coaching to Level II technicians, Level III candidates, and trainees.
  • Support development of the internal aviation NDT workforce and succession planning.
  • Serve as Chief Inspector for PROtect’s FAA Part 145 Repair Station and oversee inspection and quality-control functions.
  • Ensure inspections are performed by trained, qualified, certified, and authorized personnel using current, approved technical data.
  • Ensure inspection records are accurate, complete, traceable, and maintained in accordance with FAA and company requirements.
  • Monitor compliance with the Repair Station Manual, Quality Control Manual, NDT Written Practice, capability requirements, and applicable procedures.
  • Ensure inspection equipment, tooling, reference standards, and measuring devices are identified, controlled, calibrated, and maintained.
  • Review inspection discrepancies, nonconformances, and corrective actions requiring technical or quality oversight.
  • Support FAA surveillance, certification activities, customer and internal audits, and regulatory inspections; coordinate corrective actions resulting from findings or deficiencies.
  • Reject, hold, or stop nonconforming work and ensure it is not released.
  • Maintain working knowledge of 14 CFR Parts 43 and 145 and serve as a primary FAA contact for inspection and quality matters.
  • Review customer NDT specifications, work scopes, maintenance instructions, and inspection requests; ensure procedures are technically adequate and compliant.
  • Develop and approve inspection techniques where permitted by applicable technical data, and ensure document revisions are reviewed, approved, and controlled.
  • Provide technical interpretation of unclear or conflicting requirements and support engineering coordination for OEM or customer clarification.
  • Support development, review, and revision of Aviation NDT quality procedures and records; review NDT documentation for accuracy, completeness, traceability, and technical compliance.
  • Support root-cause analysis, corrective-action development, nonconformance resolution, capability-list evaluation, and self-evaluation activities.
  • Serve as a senior technical resource for customers; support inspection planning, capability assessments, procedure reviews, proposals, statements of work, and inspection-support requirements.
  • Provide technical support for embedded, AOG, project-based, and contract NDT services; support customer audits and technical reviews.
  • Maintain professional relationships with customers, OEM representatives, suppliers, and regulatory personnel.
  • Perform other duties as assigned.
  • Travel as required for customer operations, audits, training, certification activities, and Aviation NDT field requirements.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service