Assembly and Test Operator (LitePoint, San Jose, CA)

Teradyne•San Jose, CA
•$25 - $29•Onsite

About The Position

LitePoint, a wholly owned subsidiary of Teradyne, develops wireless test solutions used by manufacturers of wireless devices and chipsets. The Assembly and Test Operator is part of LitePoint’s operations team and works hands-on with RF, wireless, electronic, and electro-mechanical test instruments. The role supports production, calibration, final testing, and service returns for equipment used to validate Wi-Fi, Bluetooth, cellular, ultra-wideband, and other wireless technologies. The operator assembles, configures, tests, troubleshoots, and repairs instruments using manufacturing instructions, test procedures, schematics, drawings, bills of materials, and engineering change documentation. The role collaborates with manufacturing, RF, product, quality, and test engineering teams and contributes to new product introduction, pilot builds, process validation, and engineering experiments. Candidates must be local to the position location; relocation and visa sponsorship are not available.

Requirements

  • High school diploma or equivalent.
  • 3–5 years of experience in assembly, manufacturing test, calibration, repair, or troubleshooting of RF, wireless, electronic, or electro-mechanical instrumentation.
  • Ability to read and follow English-language manufacturing and test instructions, schematics, assembly drawings, wiring and RF block diagrams, bills of materials, engineering change orders, and process deviations.
  • Hands-on capability with common hand tools, torque-controlled tools, fixtures, cable routing, RF connectors, and precision components.
  • Experience operating production test equipment and interpreting results, with basic knowledge of RF signal paths, analog and digital circuits, and power supplies.
  • Ability to maintain accurate records and product traceability and clearly communicate defects and abnormal conditions.
  • Ability to work effectively with assemblers, test operators, engineers, quality personnel, and supervisors.
  • Strong attention to detail, manual dexterity, organization, and adherence to documented processes.
  • Ability to safely move production hardware, work seated or stand for extended periods, and use required personal protective equipment with reasonable accommodation.
  • Must be local to the position location; relocation is not provided.
  • Visa sponsorship is not available for this position.

Nice To Haves

  • Associate degree or technical certification in electronics, RF technology, instrumentation, or mechatronics.
  • Familiarity with Wi-Fi, Bluetooth, cellular, or ultra-wideband and RF concepts such as frequency, power, gain, attenuation, return loss, insertion loss, and spurious signals.
  • Hand-soldering and rework experience.
  • IPC J-STD-001, IPC-A-610, or equivalent certification.

Responsibilities

  • Assemble RF, electronic, mechanical, and electro-mechanical products according to manufacturing process instructions, drawings, bills of materials, and written instructions.
  • Set up instruments; load software; configure, functionally test, support calibration, and perform final acceptance testing of wireless test systems, RF modules, PCBAs, and assemblies.
  • Install and inspect RF cables, coaxial connectors, attenuators, couplers, switches, filters, amplifiers, shields, antennas, harnesses, and high-speed cables using approved routing, torque, and labeling practices.
  • Troubleshoot RF, analog, digital, power, and electro-mechanical failures to the instrument, module, board, cable, connector, or component level.
  • Operate spectrum analyzers, vector network analyzers, signal generators, RF power meters, oscilloscopes, digital multimeters, power supplies, and frequency counters.
  • Disassemble, repair, modify, and reassemble production units and service returns according to engineering change orders, process deviations, and manufacturing instructions.
  • Perform qualified hand soldering and rework of fine-pitch components, 0201 and 0402 parts, jumper wires, RF shields, and cable assemblies.
  • Inspect PCBA, RF cable, connector, shielding, mechanical, and system workmanship against drawings and quality standards.
  • Record assembly, test, calibration, repair, and defect results in manufacturing and quality systems while maintaining product traceability.
  • Support containment and root-cause investigations by providing error logs, measured voltages, RF power levels, frequency-response data, and calibration results.
  • Support new product introduction, pilot builds, process validation, and engineering experiments; provide feedback on assembly methods, fixtures, and work instructions.
  • Follow established procedures, identify conditions requiring escalation, and seek guidance for unfamiliar tasks.

Benefits

  • Medical insurance
  • Dental insurance
  • Vision insurance
  • Flexible Spending Accounts
  • Retirement savings plans
  • Life insurance
  • Disability insurance
  • Paid vacation
  • Paid holidays
  • Tuition assistance programs
  • Discretionary bonuses based on financial performance
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service