Scrap Inspector

Enviri Corporation•Pueblo, CO

3d•Onsite

About The Position

This position will encompass the following responsibilities. This is not considered to be an all-encompassing list of responsibilities, and additional duties may be assigned as needed to support the business. Inspect all inbound scrap via tractor trailer and direct trucks where to dump load. As requested, assist in inspecting inbound scrap via railroad car. Spot check suspected radioactive cars or truck loads with handheld Geiger counter Spot check suspected off chemistry scrap with handheld Niton XRF machine. As requested, assist in tracking or isolating suspected scrap for off chemistry heats at the furnace. Notify material handler operators when loads are clear to add to existing stockpile Advise Production Supervisor or scrap yard operators when scrap has been cleared and they begin shearing/cutting/processing. Provide data needed to complete daily reports to the Clerk on the scrap yard side. Assist Production Supervisor in providing guidance to the general hourly workforce as needed.

Requirements

Must be able to: Bend/stoop for up to 5 minutes while inspecting scrap that is on the ground.
Have the ability to climb flights of stairs to reach the inspection stand at the scrapyard.
Have the ability to climb the ladder on the side of a rail car
Have the ability to lift up to 50 lbs.
Have the ability to work in ambient temperatures as low as -10 degrees and as high as 105 degrees, all work will be outdoors.
Have the ability to think and make clear decisions under pressure
Some computer experience preferred, i.e. Excel, Word, generic knowledge
Must have a high school education or equivalent

Nice To Haves

Previous scrap metal experience would be beneficial, but not required.

Responsibilities

Inspect all inbound scrap via tractor trailer and direct trucks where to dump load.
Assist in inspecting inbound scrap via railroad car.
Spot check suspected radioactive cars or truck loads with handheld Geiger counter
Spot check suspected off chemistry scrap with handheld Niton XRF machine.
Assist in tracking or isolating suspected scrap for off chemistry heats at the furnace.
Notify material handler operators when loads are clear to add to existing stockpile
Advise Production Supervisor or scrap yard operators when scrap has been cleared and they begin shearing/cutting/processing.
Provide data needed to complete daily reports to the Clerk on the scrap yard side.
Assist Production Supervisor in providing guidance to the general hourly workforce as needed.