Industrial Power & Controls Electrician (Multicraft)

Novolex Corporate•Athens, GA

About The Position

A day in the life You start your shift by logging into the maintenance system to review open work orders and electrical repair priorities. From there, you’ll move between planned PMs and urgent diagnostics—one hour you’re tracing a fault on a 480V three‑phase circuit, the next you’re fabricating a bracket and welding it into place so a sensor aligns perfectly. You’re equally comfortable on a ladder running conduit as you are with a meter in hand validating control power and drives. Throughout the day, you document your work, follow blueprints, and advise supervisors if operating a machine could be unsafe. What you’ll tackle Review job status and repair queues using a computer-based maintenance system. Inspect and test electrical issues using meters, schematics, manuals, and blueprints. Perform corrective and preventive maintenance on equipment and electrical circuits. Handle mechanical maintenance and repairs alongside electrical work. Fabricate parts and weld brackets as needed to support reliable operation. Install and connect power to machines; run cables between equipment per schematics and manuals. Terminate wires to breakers, transformers, and related components across low- and high-voltage systems. Diagnose and repair failures in transformers, motors, lighting, and related apparatus; replace damaged wiring and cabling. Use construction power tools, precision measuring devices, and electrical test equipment safely and effectively. Inspect systems for hazards, defects, and code compliance; make adjustments or repairs as required. Create sketches or follow blueprints to plan wiring/equipment locations and verify adherence to building and safety codes. Install conduit and associated wiring; troubleshoot systems to root cause and correct issues. Work from ladders, scaffolds, or roofs to install, maintain, and repair wiring, machines, and equipment. Advise management when continued equipment operation presents safety risks. Follow all Safe Quality Food (SQF) requirements and site safety procedures, including wearing required PPE. What you bring Recent technical school graduates (Electrical Systems, Mechatronics, or Industrial Maintenance) are strongly encouraged to apply. Ability to pass the Ramsay Assessment (60 mechanical questions + 60 electrical questions). Machining capability (mill, lathe, grinder, saw, drill, etc.). Welding experience (TIG and stick). Fluency in reading and interpreting blueprints and schematics (electrical, mechanical, hydraulic, pneumatic). Basic plumbing skills (threading, soldering joints, etc.). Hands-on systems experience Mechanical systems: gears, pulleys, chains, belts, shafts, industrial gearboxes, water pumps, air compressors (HVAC experience is a plus). Electrical systems: AC/DC motors and drives, 480V three-phase, transformers, control power, relays. Pneumatics: valves, controls, pressure/flow, cylinders. Hydraulics: valves, controls, pressure/flow, cylinders. Electronics/controls: ladder logic, PLC programming (C programming is a plus). Core proficiencies HVAC PLC troubleshooting and wiring Electrical and equipment troubleshooting Soldering Single- and three-phase power 120/208/240/480V systems Hydraulics Industrial automation troubleshooting PLC programming Pipefitting Experience in a manufacturing environment Tools and technologies you’ll use Variable Frequency Drives (VFDs) Programmable Logic Controllers (PLC) – Allen‑Bradley, Siemens Servo motors Work environment and requirements High school diploma or GED. Reliable attendance, strong work ethic, and the ability to prioritize independently. Ability to stand for 8 hours per day. Frequently lift up to 50 lbs. Wear protective equipment as required. Willing and able to work a rotating shift.

Requirements

High school diploma or GED.
Ability to pass the Ramsay Assessment (60 mechanical questions + 60 electrical questions).
Machining capability (mill, lathe, grinder, saw, drill, etc.).
Welding experience (TIG and stick).
Fluency in reading and interpreting blueprints and schematics (electrical, mechanical, hydraulic, pneumatic).
Basic plumbing skills (threading, soldering joints, etc.).
Hands-on systems experience Mechanical systems: gears, pulleys, chains, belts, shafts, industrial gearboxes, water pumps, air compressors (HVAC experience is a plus).
Electrical systems: AC/DC motors and drives, 480V three-phase, transformers, control power, relays.
Pneumatics: valves, controls, pressure/flow, cylinders.
Hydraulics: valves, controls, pressure/flow, cylinders.
Electronics/controls: ladder logic, PLC programming (C programming is a plus).
Reliable attendance, strong work ethic, and the ability to prioritize independently.
Ability to stand for 8 hours per day.
Frequently lift up to 50 lbs.
Wear protective equipment as required.
Willing and able to work a rotating shift.

Nice To Haves

Recent technical school graduates (Electrical Systems, Mechatronics, or Industrial Maintenance) are strongly encouraged to apply.
Core proficiencies HVAC
PLC troubleshooting and wiring
Electrical and equipment troubleshooting
Soldering
Single- and three-phase power 120/208/240/480V systems
Hydraulics
Industrial automation troubleshooting
PLC programming
Pipefitting
Experience in a manufacturing environment

Responsibilities

Review job status and repair queues using a computer-based maintenance system.
Inspect and test electrical issues using meters, schematics, manuals, and blueprints.
Perform corrective and preventive maintenance on equipment and electrical circuits.
Handle mechanical maintenance and repairs alongside electrical work.
Fabricate parts and weld brackets as needed to support reliable operation.
Install and connect power to machines; run cables between equipment per schematics and manuals.
Terminate wires to breakers, transformers, and related components across low- and high-voltage systems.
Diagnose and repair failures in transformers, motors, lighting, and related apparatus; replace damaged wiring and cabling.
Use construction power tools, precision measuring devices, and electrical test equipment safely and effectively.
Inspect systems for hazards, defects, and code compliance; make adjustments or repairs as required.
Create sketches or follow blueprints to plan wiring/equipment locations and verify adherence to building and safety codes.
Install conduit and associated wiring; troubleshoot systems to root cause and correct issues.
Work from ladders, scaffolds, or roofs to install, maintain, and repair wiring, machines, and equipment.
Advise management when continued equipment operation presents safety risks.
Follow all Safe Quality Food (SQF) requirements and site safety procedures, including wearing required PPE.