Finisher I (Night Shift)

Shalby Advanced Technologies Inc•El Dorado Hills, CA

7d•$20 - $21

About The Position

This position is for the Night Shift (Alternate Work Week): Monday through Thursdays, 3:00pm-1:00am. The Finisher I is responsible for manufacturing finishing operations on implants and instruments. Essential Functions: The Finisher I is responsible for performance of the following essential functions required for the finishing of medical grade knee and hip implants and surgical instrument sets in accordance with documented procedures and using the proper Personal Protective Equipment (PPE): Deburring: Wearing proper PPE. Grinding, Belting, filing, and other hand tools to remove burrs from edges of parts and establish our finish as required. Metal Polishing: Wearing proper PPE fully gowned and wearing a full hood. Buffing parts on a grinder using polishing compound. Cleaning Parts: Cleaning parts using detergents, isopropyl alcohol, nitric acid, and deionized water. Inspecting parts and moving them out of the shop. Drag Finishing Machine: Run and operate Rosler drag finisher, maintain centrifuge and water using proper chemicals per machine specs. Lapper Machine: Run and operate Kemet lapping machine. Maintain polishing components, lubrication, and manufacturer cutting pads. Laser marker: Run laser marker wearing all required PPE to mark parts per print. Typical Working Conditions, Equipment Used, and Essential Physical Tasks: Depending on task assignment, the physical demands described here may be representative of those that must be met by an employee to successfully perform the essential functions of this job. Percentage of time in essential function may depend on assignment of tasks: Walking and standing on hard surface while using tools or machinery. Sitting for periods of up to 2 hours. Bending, kneeling, squatting, stooping, reaching, pulling, pushing, and lifting up-to 50 lbs. Exposure to rotating and reciprocating parts. Must be able to stand for long periods of time. Exposure to loud noises generated from manufacturing equipment. Using scalpels, Exacto knives and sharp tooling The expected base salary range for this position is between $19.50-$20.50 per hour and the compensation offered will depend on the candidate’s qualifications. We offer company holidays, vacation and sick time off, medical, dental, vision, disability and life benefits as well as a 401(k) Plan.

Requirements

0-1 year of experience in finishing
Experience with finishing methods and tools
Basic understanding of reading drawings
General knowledge of quality policy, especially as related to product realization and recordkeeping-Knowledge of personal safety requirements
Ability to finish product with minimal supervision but still requiring input from finishing department supervisor
Ability to finish some product independently

Responsibilities

Deburring: Wearing proper PPE. Grinding, Belting, filing, and other hand tools to remove burrs from edges of parts and establish our finish as required.
Metal Polishing: Wearing proper PPE fully gowned and wearing a full hood. Buffing parts on a grinder using polishing compound.
Cleaning Parts: Cleaning parts using detergents, isopropyl alcohol, nitric acid, and deionized water. Inspecting parts and moving them out of the shop.
Drag Finishing Machine: Run and operate Rosler drag finisher, maintain centrifuge and water using proper chemicals per machine specs.
Lapper Machine: Run and operate Kemet lapping machine. Maintain polishing components, lubrication, and manufacturer cutting pads.
Laser marker: Run laser marker wearing all required PPE to mark parts per print.