Service Field Tech

Now Hiring•Rowlett, TX

5d•$40 - $60

About The Position

Service Field Tech - MV Cable Termination/Splicer are expected to perform installations, splicing, termination service, test and maintain various types of power transmission and distribution equipment. Duties and Responsibilities: Test and inspect low and medium voltage and high voltages 69KV and above cable installations, terminations, splicing on various OEM cables. Experience with live front stress cones, 600-amp dead breaks, 200-amp load breaks, inline splices, 2-way dead break splices, Pfisterer Connex high voltages 69KV and above experience is preferred. Inspect, test, troubleshoot, perform start-up and collect data of low, medium and/ or high voltage (to 500kV) electrical systems. Low, Medium and/ or High voltage switchgear and circuit breaker testing Perform inspection, maintenance, testing and repair of transformers , circuit breakers and all related equipment – 45 KVA to 130 MVA, dry type and/ or oil filled. Perform maintenance, testing, reconditioning and repair on circuit breakers – low voltage 480 volt (molded case and air-magnetic) medium voltage up to 15 KV (air-magnetic and vacuum) Experience filling and working with SF6 filled equipment and gas insulated switchgear, desired but not required. Experience operating high voltage test equipment including Doble Power Factor test sets. Perform start-up, troubleshooting and repair services on controls and transfer schemes. Rotate emergency on-call duty and if called respond to customer emergencies in a timely manner. All work and decisions shall be conducted in strict compliance of all regulatory laws. Other duties as assigned by manager. Required Experience and Qualifications for a Sr. Field Tech: High School diploma/GED or equivalent experience and 5 years of experience in a related field. Strong background in medium voltage cable termination, splicing, and installations. Knowledge of the National Electrical Code and various industry standards, such as NETA, OSHA, IEEE and NFPA. Strong background and experience in most types of medium voltage and high voltage equipment 69KV and above. Prefer experience with most of the following or similar: MCC’s, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program) Complete projects consistently on budget and at a reasonable contribution. Ability to complete on-site job reports. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver’s license. Required Experience and Qualifications for a Power Systems Tech III: High School diploma/GED and minimum 5 years of experience in a related field. NETA Level III Certification. Power Systems Tech III performs testing and service work and can mentor, lead level I and level II Techs as directed by Supervisor/Manager. This position is responsible for performance and management of routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. This position is qualified to provide guidance and can perform electrical power switching. Prefer experience with most of the following or similar: MCC’s, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver’s license. Required Experience and Qualifications for a Power Systems Tech IV: Associate degree in related field or equivalent experience and minimum 5 years of experience or 10 years of related experience. NETA Level IV Certification. Power Systems Tech IV performs testing and service work and can mentor, lead level I and level II and level III Techs as directed by Supervisor/Manager. This position is responsible for performance and management of routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. This position is qualified to provide guidance and can perform electrical power switching. Position, as directed, supervises large projects and multiple crews and can work independently. Individual performs complex investigations, tests, and evaluations, and prepares written reports as needed. Prefer experience with most of the following or similar: MCC’s, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program). Knowledge of various industry standards such as: NETA, NEC, OSHA and NFPA. Must be able to work safely and adhere to all electrical safety procedures. Good theoretical understanding of electricity and a good aptitude for problem solving. Effectively communicate verbally and in writing with customers and peers. Dependable and responsible with good judgment and organizational skills. Good customer service, time management and follow-up skills. Work effectively with customers, peers and management to resolve client issues. Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research For positions that utilize a company vehicle, will be required to have a valid driver’s license.

Requirements

High School diploma/GED or equivalent experience and 5 years of experience in a related field.
Strong background in medium voltage cable termination, splicing, and installations.
Knowledge of the National Electrical Code and various industry standards, such as NETA, OSHA, IEEE and NFPA.
Strong background and experience in most types of medium voltage and high voltage equipment 69KV and above.
Complete projects consistently on budget and at a reasonable contribution.
Ability to complete on-site job reports.
Work effectively with customers, peers and management to resolve client issues.
Strong computer skills with working knowledge of Windows and Microsoft Office- use of Internet for standards/products/manufacturer research
For positions that utilize a company vehicle, will be required to have a valid driver’s license.
High School diploma/GED and minimum 5 years of experience in a related field.
NETA Level III Certification.
Must be able to work safely and adhere to all electrical safety procedures.
Good theoretical understanding of electricity and a good aptitude for problem solving.
Effectively communicate verbally and in writing with customers and peers.
Dependable and responsible with good judgment and organizational skills.
Good customer service, time management and follow-up skills.
Associate degree in related field or equivalent experience and minimum 5 years of experience or 10 years of related experience.
NETA Level IV Certification.

Nice To Haves

Experience with live front stress cones, 600-amp dead breaks, 200-amp load breaks, inline splices, 2-way dead break splices, Pfisterer Connex high voltages 69KV and above experience is preferred.
Experience filling and working with SF6 filled equipment and gas insulated switchgear, desired but not required.
Experience operating high voltage test equipment including Doble Power Factor test sets.
Prefer experience with most of the following or similar: MCC’s, Breakers, relay testing, oil testing, infrared scanning, performing start-up on switchgear up through 500kV class, etc. or training from the military (Army Prime Power, Air Force Electrical Power Production, NAVY or another related program).

Responsibilities

Test and inspect low and medium voltage and high voltages 69KV and above cable installations, terminations, splicing on various OEM cables.
Inspect, test, troubleshoot, perform start-up and collect data of low, medium and/ or high voltage (to 500kV) electrical systems.
Low, Medium and/ or High voltage switchgear and circuit breaker testing
Perform inspection, maintenance, testing and repair of transformers , circuit breakers and all related equipment – 45 KVA to 130 MVA, dry type and/ or oil filled.
Perform maintenance, testing, reconditioning and repair on circuit breakers – low voltage 480 volt (molded case and air-magnetic) medium voltage up to 15 KV (air-magnetic and vacuum)
Perform start-up, troubleshooting and repair services on controls and transfer schemes.
Rotate emergency on-call duty and if called respond to customer emergencies in a timely manner.
All work and decisions shall be conducted in strict compliance of all regulatory laws.
Other duties as assigned by manager.

Benefits

Full benefits including medical, dental, vision, company paid life insurance, anniversary bonuses, Employee Ownership Plan, matching 401k, and paid time off.
Daily meal and incidentals per diem available when traveling for overnight work.

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume