Quality Technician - 2nd shift

Aumovio•Morganton, NC

23d

About The Position

HOW YOU WILL MAKE AN IMPACT Quality representative for the manufacturing process. Requires ability to accept or reject product, contain suspect product, support manufacturing goals for scrap and NOK rate reduction, adhere to established quality requirements & standards, and protecting internal & external customers from non-conforming product for Morganton Plant Production Processes. Work hours are 3 pm to 11:30 pm Mon-Fri. Perform timely testing and analysis on Production parts (NOK’s, process variation, etc) to determine root cause and provide information / data for corrective actions. Monitor Production line data (SPC) to focus and prioritize part analysis and investigations to protect the customer and lower scrap rates .1) Perform testing and analysis on Production parts (NOK’s, process variation, etc…) 2) Utilize data monitoring tools to highlight analysis priorities. 3) Support (Production, QAP, IT, etc…) in establishing optimized and updated Production data monitoring methods and alert triggers. 4) Develop and maintain current knowledge / information (as necessary) on product and station drawings, specifications, etc… 5) Document findings into individual reports and/or trend information. 6) Work with Sr. Quality Engineer (Jidoka), QAP and FA Operators to establish optimized Production line analysis strategy and support accordingly (Jidoka meetings, training…). 7) Support Plant and Worldwide meetings as needed (Fast response, Jidoka, Internal Defect Management, Scrap Reduction, etc…) 8) Plan and carry out special studies as needed to lower NOK & reject rates or gather data for changes to the process or product. 9) Maintain testing and analysis equipment, perform calibration activities.

Requirements

Associates degree or 2 yrs relevant work experience in lieu of an Associates Degree.
Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas now or in the future for this job posting.
Relocation assistance is not offered for this position.

Nice To Haves

Associates degree in technical field and 1-2 years quality experience in a manufacturing environment
Automotive manufacturing experience
Experience using SAP
Experience operating test and teardown equipment (test stands, measuring devices, lathe, etc.)
Knowledge of SPC
Read and Follow Work Instructions
Ability to use MS Office, email

Responsibilities

Perform timely testing and analysis on Production parts (NOK’s, process variation, etc) to determine root cause and provide information / data for corrective actions.
Monitor Production line data (SPC) to focus and prioritize part analysis and investigations to protect the customer and lower scrap rates
Perform testing and analysis on Production parts (NOK’s, process variation, etc…)
Utilize data monitoring tools to highlight analysis priorities.
Support (Production, QAP, IT, etc…) in establishing optimized and updated Production data monitoring methods and alert triggers.
Develop and maintain current knowledge / information (as necessary) on product and station drawings, specifications, etc…
Document findings into individual reports and/or trend information.
Work with Sr. Quality Engineer (Jidoka), QAP and FA Operators to establish optimized Production line analysis strategy and support accordingly (Jidoka meetings, training…).
Support Plant and Worldwide meetings as needed (Fast response, Jidoka, Internal Defect Management, Scrap Reduction, etc…)
Plan and carry out special studies as needed to lower NOK & reject rates or gather data for changes to the process or product.
Maintain testing and analysis equipment, perform calibration activities.