P&C Field Technologist Assoc-Sr

American Electric Power•Pikeville, KY

2d•$31 - $53•Onsite

About The Position

Perform work associated with the installation, operation, testing and maintenance of fundamental protection and control devices and related equipment under general supervision. Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. Please Note this job is posted in a range from P&C Technologist Assoc – P&C Technologist Senior A successful candidate should live within 45 minutes of r the Pikeville Transmission Service Center (6809 North Mayo Trail, Pikeville KY 41501)

Requirements

Bachelor's degree in engineering in a program accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET) or a Bachelor's degree in engineering technology in a program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET).
Must successfully complete the Physical Abilities Test (PAT).
Must be able to distinguish colors on a standard color blindness test.
Working knowledge of current, potential, closing and trip circuits.
Working knowledge of material such as cable, lugs, and wire as applied to protective relay and control circuits.
Working knowledge of assembly, anchoring, and interchangeability of the various switchboard panel-support and through systems.
Must have the ability to read, understand, and correct electrical prints and diagrams and the ability to use hand tools.
Must demonstrate the ability to perform duties in an alert, safe, and business-like manner and the ability to deal with customers and other employees in a courteous and professional manner.
Ability to interpret, analyze and transmit facts graphically, orally, and in writing clearly and precisely.
Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law.
Considerable travel and overtime may be required to complete work assignments.

Responsibilities

Test fundamental protection & control devices and equipment periodically and as required.
Calibrate fundamental protection & control devices and equipment on a pre-established schedule and as required.
Assist with switching at all voltage levels under the direction of the proper Dispatching Authority.
Maintain test equipment in good working order.
Maintain accurate records, reports and drawings as required.
Operate a computer device to test, calibrate, and retrieve data from protection & control devices.
Assist in the installation, maintenance, and operation of all relays, power line carrier sets, station SCADA, and associated communications equipment or cables as assigned.
Troubleshoot and repair fundamental electromechanical relays.
Troubleshoot and repair microprocessor based relays at the card level, such as replacing power supplies, communications cards, I/O cards, etc.
Assist with the diagnosis of equipment failures, protection mis-operations, and assist with corrective action to perform repairs and prevent recurrence.
Ensure the circuitry, installation and operation of equipment is correct prior to placing equipment in service. Read electrical schematics and determine that the physical installation at the site is electrically equivalent to the schematic. Record test readings and results and determine they are within acceptable specifications and thus the physical installation will perform as per the design.
Basic fault analysis: obtain oscillography data to determine if the protective devices operated as per their issued relay settings.
Assisting a team in the installation, testing, and commissioning of new P&C systems for capital construction projects. Assist the on-site technical lead with directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project.
Assist a trip testing team.
Test complex protection & control devices and equipment periodically and as required.
Calibrate complex protection & control devices and equipment on a pre-established schedule and as required.
Perform switching at all voltage levels under the direction of the proper Dispatching Authority.
Troubleshoot and repair complex electromechanical relays.
Diagnose equipment failures, protection mis-operations and assist with corrective action to affect repair and prevent recurrence.
Fault analysis: obtain oscillography data to determine if the protective devices operated as per their issued relay settings.
Leading a team in the installation, testing, and commissioning of new P&C systems for capital construction projects. Acting as the on-site technical lead and directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project.
Lead a trip testing team with moderately complex protection & control systems.
Develop plans and test complex protection & control devices and equipment periodically and as required.
Develop the test plans and calibrate complex protection & control devices and equipment on a pre-established schedule and as required.
Provide recommendations and perform switching at all voltage levels under the direction of the proper Dispatching Authority.
Lead the installation, maintenance, and operation of all relays, power line carrier sets, station SCADA, and associated communications equipment or cables as assigned.
Demonstrate advanced knowledge in troubleshooting and repairing complex electromechanical relays at the system level.
Demonstrate advanced knowledge in troubleshooting and repairing microprocessor based relays at the system level.
Advanced diagnosis of equipment failures, protection mis-operations and determine corrective action to perform repairs and prevent recurrence.
Ensure the circuitry, installation and operation of advanced protection & control equipment is correct prior to placing equipment in service.
Advanced Fault analysis: Compile and analyze oscillography data at a system level to determine if the protective devices operated as per their issued relay settings.
Leading a team in the installation, testing, and commissioning of large complex P&C systems for capital construction projects. Acting as the on-site technical lead and directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project.
Lead a trip testing team with testing complex EHV, Industrial and Power Plant protection & control systems.