LeMar Industries Maintenance Technician I

CTBDes Moines, IA
12dOnsite

About The Position

As a Maintenance Technician you will be responsible for insuring the smooth operation of the machinery and mechanical equipment in the Des Moines facility. This will includeperforming preventative maintenance and learning to troubleshoot equipment breakdowns.

Requirements

  • None required, 2 year technical degree is preferred.
  • None required, 1-2 years is preferred.
  • Must have electrical or mechanical background and able to demonstrate a workingknowledge of the field.
  • Ability to obtain and maintain forklift, overhead crane and additionallicenses as required.
  • Ability to read blueprints, ability to read and interpret drawings related to electrical, hydraulic, pneumatic, and schematic prints and drawings.
  • Ability to operate overhead crane and forklift.
  • Good knowledge of safe rigging principles.
  • Read write and do basic math.
  • Must have knowledge of safety regulations and procedures.
  • Must have either electricalor mechanical aptitude.
  • Ability to utilize the Microsoft Suite and applicable maintenance software.
  • Ability to read, write,and communicate in English.
  • Strategic, collaborative, inclusive, creative, innovative, customer focused and passionate; Excellent interpersonal, networking, and “team building” skillswith strong organizational and motivationalability.
  • Ethical and respectful, open communication, can initiate dialog to help find solutions, team player, can-do attitude, can respectfully share information to help develop and adhere to best practices.
  • Ability to occasionally lift and carry 30 to 50 lbs
  • Ability to work up to 12 hour shifts
  • Ability to operate hand and powertools
  • Ability to remain calm and act responsibly during emergencies
  • Ability to lift and manipulate heavy equipment
  • Ability to work around grease,oil, dirt, fumes, and in hot or cold environments
  • Ability to work in awkward positions such as bending, twisting, and kneeling
  • Ability to walkor stand up to 75% of the workday
  • Ability to climb ladders and work at heights
  • Frequent bending, twisting, squatting, grasping, reaching/stretching, walking/standing
  • The employee is primarily exposed to a manufacturing environment and is required to wear suitable Personal Protective Equipment. PPE required (such as longpants and shirts,steel-toed shoes, safety glasses, hard hat, harness, hearing protection, gloves, welding PPE, arc flash PPE, air respirator)
  • Works in manufacturing environment that can be hot, noisy, oily/grease and dusty at times.
  • Must be able to work in outside weather conditions (hot and humid in the summer and very cold in the winter)
  • Working on wet surfaces (preventative maintenance in wash bay)
  • Must work at heights at times with fall protection
  • Must be willing to work in tight spaces at times

Responsibilities

  • Ability to work overtime hours as needed on breakdowns and project work. Unscheduled and unconventionalhours required.
  • Monitor and maintain area 5S safety requirements.
  • Ability to complete basic preventative maintenance like: greasing bearings, replacing saw blades, maintaining oil levels, etc.
  • Ability to work on either electrical or mechanical issues as they arise within the facility. Aptitude and driveto learn to work on both electrical and mechanical issues.
  • Ability to work autonomously on projects related to the basic building and groundsmaintenance. Thisincludes but is not limited to a snow removal, trimming of trees/shrubs, hanging/installing office equipment.
  • Strong ability to prioritizing work in a fast-paced environment.
  • Ability to assist in the disassemble and reassemble machinery and equipment.
  • Must be able to complete all physical requirements.
  • Responsible for maintaining a high safety standard throughout the plant (preventative and predictive maintenance, repairs, and improvements)
  • Responsible to follow and execute plant safety programs (lockout/tagout, etc)
  • Responsible to followall plant safety programs, more specifically lockout/tagout, safety walks, laser safety,Arc Flash safety, etc. as they are applicable to daily maintenance duties.

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume

What This Job Offers

Job Type

Full-time

Career Level

Entry Level

Education Level

No Education Listed

Number of Employees

5,001-10,000 employees

© 2024 Teal Labs, Inc
Privacy PolicyTerms of Service