Rollforming & Stamping - Machine Operator

STOW Group•Adairsville, GA

55d•Onsite

About The Position

The owner profiling and welding beams on an automated line. Responsible for profiling (cutting and shaping) steel beams according to precise specifications, then welding them on an automated production line- ensuring quality, dimensional accuracy, and safe operation throughout the entire process. You’re responsible for profiling and welding the beams Responsible for profiling (cutting and shaping) steel beams according to precise specifications, then welding them on an automated production line- ensuring quality, dimensional accuracy, and safe operation throughout the entire process.

Requirements

Knowledge of the operation of machines.
Welding robots: handling, positioning robots, modifying welding positioning with supervisor permission
TCP Torch Control,
Profiling, adjustment of profiles to the design dimensions,
Welding Permit (for small repairs)
Working with the computer
Read profile map

Responsibilities

Ensure that all beam welds meet the quality standards defined by EN 1090 Execution Class C.
Respect safety
Quality control: once an hour two stringers on the control station (4 stringers for Beamline 4)
Length
Visual inspection of the weld (6 welds + intermediate points) + "a" value check
X value of the hooks + type of hooks
Torsion
Profile height
When the quality is not good, the operator must quarantine his production and notify your supervisor to find a solution to the problem and determine the purpose of the immobilized production.
Turn unwinder with buttons
Introducing the coil into the leveler
Insert coil into the roll forming machine and set it to automatic unwinding.
Introduce coil into the flying shears + cut short length
Set line to automatic + check the profile dimensions + adjust if necessary
Adjust profiling: change numeric value
Changing cutting dies
Reset the weld line
Put the new type of profiles on the screen and send to the robots (program number)
Check +modify the mechanical values of the stations
Change the value of the length on the roll forming or punching screen
Change station positioning 1 automatic length control system
Check +modify the mechanical values of the stations
Put new length on the screen for robots + reset the line
Remove the hooks from the conveyor
Put new type on the screen + send to the robots.
Put the new hooks on the conveyor
Adapt the welding positions of the robots with the supervisor's permission.
Repair bad welds manually with welder
Maintenance of the robots (at the welding level): contact tip, welding nozzle, TCP control, torch, sheaths, welding wires, putting new welding wires, cleaning – oiling of the welding wire unwinders.
Cleaning + order and cleanliness of the line. Each team has one area per 2 weeks to clean.
Sorting good profiles with bad ones
The goal is to have as little waste as possible.
Follow ERP
Software encoding: quality control, throughput
The operator warns the painter of the colour to be expected.
Provides Level 1 maintenance
Helps with maintenance during certain repairs (basic), explanation of the problem to make the diagnosis, manual help, change a screw or tighten, adjust a cell.
You perform the 5S audits according to the instructions
Every employee at stow contributes to a safe and compliant work environment. We set the example and motivate each other to work safely, efficiently, and in a qualitative way. stow’s standards, policies, instructions, and local legislations are there to guide our decisions.