Investment Operator - Day Shift
About The Position
Under general supervision, inspect, clean, dip wax pattern assemblies and maintain slurry tanks in accordance with quality standards. Ensure that documentation and parts are correctly matched. Objective: Under general supervision, oversee and perform dip and stucco operations of wax patterns to produce shell molds. Inspect shell molds to ensure conformance to published specifications on technique cards approved by plant Quality Department. Essential Job Functions: Follow established housekeeping and safety practices to maintain the quality of the work environment. Under general supervision, mix slurries and dip patterns for the forming of shell molds; responsibility for slurry viscosity maintenance and data recording for optimum operation. Perform visual (cracks, bridging, foreign material, etc.) and mechanical inspection of shell molds for strength; control correct drying time between coats and speed of drying. Work is subject to final inspection and check. Read, comprehend and have ready access to O.P.C. and Q.C.P. Manuals. Build, mix and maintain slurry tanks and sand beds to obtain optimum dipping conditions. Demonstrate thorough understanding of ceramic shell process and particularly all causes of casting defects which are investment caused or related. Demonstrate good eye hand coordination. Meet all production and quality standards. Access main computer system to maintain accurate records of work performed. Work safely when lifting, use transport devises and get help on larger items to work area. Verify all parameters on tech cards for number of coats, special handling, core packing, etc. for each specific lot. Attach dip handles to wax pattern trees. Clean parts to remove grease and dirt; etch parts and hang to dry. Dip patterns into slurries and show ability and skill to drain, stucco, dry molds, and understand critical factors. Wheel and shovel sand to the tanks. Inspect wax patterns for defects. Weigh and measure proportions of ceramics, binders, etc. Load and operate machine to manufacture slurry. Keep all Zahn Cups, dilution equipment, mixers, etc. clean and in optimum condition. Assist in training lower skilled classifications as required. Follow established housekeeping and safety practices to maintain the quality of the work environment. Perform all work deemed necessary to meet Plant goals. Must be able to lift to 35lbs. Adhere to plant and department safety rules. Identify and report safety problems. Safely operate all equipment and tools.
Requirements
- Experience and/or training are included in considerations.
- Able to perform basic mathematical calculations.
- Able to precisely follow written recipes for slurry tanks, core material and all other mixtures necessary in area.
- Must be able to lift to 35lbs.
Responsibilities
- Inspect, clean, dip wax pattern assemblies and maintain slurry tanks in accordance with quality standards.
- Oversee and perform dip and stucco operations of wax patterns to produce shell molds.
- Inspect shell molds to ensure conformance to published specifications on technique cards approved by plant Quality Department.
- Follow established housekeeping and safety practices to maintain the quality of the work environment.
- Mix slurries and dip patterns for the forming of shell molds; responsibility for slurry viscosity maintenance and data recording for optimum operation.
- Perform visual (cracks, bridging, foreign material, etc.) and mechanical inspection of shell molds for strength; control correct drying time between coats and speed of drying.
- Read, comprehend and have ready access to O.P.C. and Q.C.P. Manuals.
- Build, mix and maintain slurry tanks and sand beds to obtain optimum dipping conditions.
- Demonstrate thorough understanding of ceramic shell process and particularly all causes of casting defects which are investment caused or related.
- Demonstrate good eye hand coordination.
- Meet all production and quality standards.
- Access main computer system to maintain accurate records of work performed.
- Work safely when lifting, use transport devises and get help on larger items to work area.
- Verify all parameters on tech cards for number of coats, special handling, core packing, etc. for each specific lot.
- Attach dip handles to wax pattern trees.
- Clean parts to remove grease and dirt; etch parts and hang to dry.
- Dip patterns into slurries and show ability and skill to drain, stucco, dry molds, and understand critical factors.
- Wheel and shovel sand to the tanks.
- Inspect wax patterns for defects.
- Weigh and measure proportions of ceramics, binders, etc.
- Load and operate machine to manufacture slurry.
- Keep all Zahn Cups, dilution equipment, mixers, etc. clean and in optimum condition.
- Assist in training lower skilled classifications as required.
- Perform all work deemed necessary to meet Plant goals.
- Adhere to plant and department safety rules.
- Identify and report safety problems.
- Safely operate all equipment and tools.
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Entry Level
Education Level
No Education Listed
Number of Employees
5,001-10,000 employees
