Filler - Ross Plant

Tree Top•Selah, WA

7d•$18 - $23•Onsite

About The Position

Ensure final product has correct weight of finished goods and free of foreign materials; ensure final cases are properly sealed; perform custodial duties; inspect final product to remove defects and foreign materials; erect boxes and insert liners and bags to meet process needs. ESSENTIAL FUNCTIONS: Other duties may be assigned. All of the following are to be performed while adhering to Tree Top operational policies, safety rules, procedures and good manufacturing practices. It is the responsibility of every employee at Tree Top Inc. to report food safety and food quality problems or risks to personnel with the authority to initiate action against these said possible risks. The Organization chart indicated key personnel with the authority to take action. This is a representative sample--not to imply a complete listing of all responsibilities and tasks.

Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required
Thirty days position-related experience and/or training; or equivalent combination of education and experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals such as the MSDS and other technical manuals
Ability to add and subtract.
Hair Net
Bump Cap
Rubber Gloves
Hearing Protection
Rain/Wet Gear Safety Glasses
Rubber Boots
Face Shield (When Required

Responsibilities

Remove Foreign Materials from Finished Product Cases
Identify and remove foreign materials (stickers, metal, debris, etc.)
Identify and remove any defects from fruit (Excessive Vegetative Matter: stem, peel, core, seed)
Notify the Supervisor and Lab Technician when foreign materials are found
Manually Weigh Finished Products at Filling and/or Weighing Stations
Identify net weight of product, and remove or add product to correct container, according to customers specifications
Tare out empty scale to packaging materials
Manually Seal and Tape Finished Containers
Properly Seal liner/Container using manual sealers
Verify seal integrity of containers and document in Seal Log Verification Sheet
Tape container closed
Verify if mechanical press is allowed by spec
Communicate with Co-workers and Management Regarding Weight and Quality of Finished Product
Inform Packaging Team Lead and Quality Technician of poor quality product and/or of product fitting poorly into container
Receive information from Management and/or refer to customer specification, regarding correct weight of finished product
Verify correct boxes and liners are being used
Maintain Adequate Production Supply so Line Flow is not Interrupted
Remove container from under filler, and/or weigh station when filled and sealed, to maintain line flow and not back-up process
Erect boxes and liners to meet production line flow
Advise Operator and/or Supervisor when supplies are low
Perform Housekeeping Assignments as Required
Perform housekeeping job requirements
Inform Team Lead of any packaging materials or product which has fallen on the floor and needs to be addressed to stay in compliance with GMP's
Industrial and Food Safety
Follow proper Lock-Out/Tag-Out procedures/standards
Follow all Haz-Com and Chemical Safety procedures and standards
Follow all Good Manufacturing Practice procedures and standards
Follow all Hazard Analysis Critical Control Point procedure/standards
Wear required and appropriate Personal Protective Equipment at all times
Identify and address all unsafe conditions and unsafe acts - Report to Supervisor on shift
Follow all other applicable safety rules and regulations