YUL - Airframe Sheet Metal Mech IV

Calista Corporation•Meridianville, AL

13d

About The Position

Yulista Integrated Solutions LLC Regular ESSENTIAL FUNCTIONS • Interface with Crew lead and other Technicians as required. • Mentor and train less experienced technicians as needed. • Install sheet metal & structures IAW instructions/drawings. • Install sheet metal & structures as required meeting customer needs. • Other duties as assigned. • Must be willing to travel overseas. • Perform regular Foreign Object Damage (FOD) walks. • Perform continuity and power checks. • Operate Ground Support Equipment (Power Cart, Tug, Forklift, etc.). • Provide own tools with the exception of specialty tools. • Remove, inspect, repair, and reinstall aircraft parts/systems. • Annotate logbook and workbook entries IAW DA PAM 738-751 or other contractual guidance. • Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform rotating break room cleaning duties. • Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications. • Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. • Other duties as assigned. SUPERVISORY RESPONSIBILITIES This position does not have direct reports. KNOWLEDGE, SKILLS, & ABILITIES: • May require knowledge of and experience performing structural repairs/ enhancements on the following aircraft: UH-60 A/L, UH-60 M, 407, 206, OH-58, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, EC-145, EC-135, LUH-72, UC-35, 407, V22, AH-IF, COBRA, APACHE • Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weightlifting devices. • Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. • Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, and standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. • Ability to read and interpret all blueprints and drawings. • Use special test equipment and tools. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. • Ability to write routine reports and correspondence. • Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must represent Yulista Aviation, Inc. in a professional manner at all times. • Must be trustworthy – will handle confidential information routinely. • Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. • Ability to follow a process. • Strong professional customer service skills, including active listening, prompt service and follow-up. • Analytical skills with the ability to evaluate data and consider decision impact across multiple areas. • Strong decision analysis and problem-solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management. • Ability to learn and understand corporate policies and procedures and how they relate to Yulista Aviation, Inc.’s goals. • Ability to perform basic mathematical computations. • High degree of self-motivation and the ability to work independently. • Ability to multi-task. • Have the ability to multitask. • Knowledge of commonly used concepts, practices, and procedures within the field required. QUALIFICATIONS: • High School Diploma or Equivalent with 15 years’ experience with 5 years using military standards and specifications. • Strong communication skills (verbal and written). • Ability to pass a drug and background screening. • Must be able to obtain and maintain a government security clearance.

Requirements

May require knowledge of and experience performing structural repairs/ enhancements on the following aircraft: UH-60 A/L, UH-60 M, 407, 206, OH-58, AH 64 D, AH-64E, CH-47 F, MC-130J, HC-130, C-130, C-26, EC-145, EC-135, LUH-72, UC-35, 407, V22, AH-IF, COBRA, APACHE
Must be capable of carrying items up to 40 pounds. Heavier items must seek assistance of other workers or weightlifting devices.
Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.
Must be capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, and standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.
Ability to read and interpret all blueprints and drawings.
Use special test equipment and tools.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence.
Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with external contacts such as customers, vendors, suppliers, shipping companies, etc. Must represent Yulista Aviation, Inc. in a professional manner at all times.
Must be trustworthy – will handle confidential information routinely.
Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc.
Ability to follow a process.
Strong professional customer service skills, including active listening, prompt service and follow-up.
Analytical skills with the ability to evaluate data and consider decision impact across multiple areas.
Strong decision analysis and problem-solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management.
Ability to learn and understand corporate policies and procedures and how they relate to Yulista Aviation, Inc.’s goals.
Ability to perform basic mathematical computations.
High degree of self-motivation and the ability to work independently.
Ability to multi-task.
Have the ability to multitask.
Knowledge of commonly used concepts, practices, and procedures within the field required.
High School Diploma or Equivalent with 15 years’ experience with 5 years using military standards and specifications.
Strong communication skills (verbal and written).
Ability to pass a drug and background screening.
Must be able to obtain and maintain a government security clearance.

Responsibilities

Interface with Crew lead and other Technicians as required.
Mentor and train less experienced technicians as needed.
Install sheet metal & structures IAW instructions/drawings.
Install sheet metal & structures as required meeting customer needs.
Other duties as assigned.
Must be willing to travel overseas.
Perform regular Foreign Object Damage (FOD) walks.
Perform continuity and power checks.
Operate Ground Support Equipment (Power Cart, Tug, Forklift, etc.).
Provide own tools with the exception of specialty tools.
Remove, inspect, repair, and reinstall aircraft parts/systems.
Annotate logbook and workbook entries IAW DA PAM 738-751 or other contractual guidance.
Maintain a high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform rotating break room cleaning duties.
Comply with processes and procedures as per DHS/Department of Defense (DOD) documents and publications.
Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor.
Other duties as assigned.