Welder III

Lewis Resource Management•Encinal, TX

2d•Onsite

About The Position

Lewis Energy Group is a vertically integrated E&P Company. We are one of the top national gas producers in South Texas and in the nation. We operate in South Texas and have international operations. We are proud of the family-oriented work culture we have built over the decades. This culture carries into the pride we take in our work and in the communities, we operate in. Lewis Energy Group is looking for a highly motivated Welder III to join our Fabrication team. The welder w elds together metal components of products such as Drilling Rigs, pipelines, pre-fabricated risers, vehicles, and heavy equipment with (SMAW) Shield Metal Arc Welding or (GTAW) Gas Tungsten Arc Welding, (GMAW) Gas Metal Arc Welding, Oxy-acetylene welding. Gather dimensions and lays them out on structural steel / high pressure piping. Rolls, offsets, miters, and “POP” are calculated to produce pre-fabricate finished goods. Fabrication / installation of conductor, Braiden-head, casing cut-offs, plug and abandon. Provides bill of material / ISO for installation of Compressors / pig launchers.

Requirements

One year certificate from college or technical school; minimum of three years of related experience and/or training; or equivalent combination of education and experience.
Ability to pass AWS D1: 3G, 4G test (required).
1 st Test 3G 1/8” 6010 Plus Root CJP 3/32” 7018 Hot Pass 1/8” 7018” Fill and Cap Back Gauge Root and Cap with 1/8” 7018
2 nd Test 4G 1/8” 6010 Plus Root CJP 3/32” 7018 Hot Pass 1/8” 7018” Fill and Cap Back Gauge Root and Cap with 1/8” 7018
Ability to pass 2 tests, ASME 2” sch. 160 6G (required).
1 st Test 1/8” 6010 plus Root CJP 3/32” 7018 Hot Pass 3/32” 7018 Fill and Cap
2 nd Test 1/8” 6010 plus Root CJP 5/32” 8010 P-1 Hot Pass 5/32” 8010 P-1 Fill and Cap
Ability to pass 2 tests, API 1104 12 inch std. on Butt and Branch (required).
1 st Test Butt 1/8” 6010 plus Root CJP 5/32” 8010 P1 Hot Pass 3/16” 8010 P1 Fill and Cap
2 nd Test Branch 1/8” 6010 plus Root CJP 5/32” 8010 P-1 Hot Pass 5/32” 8010 P-1 Fill and Cap
Strong organizational skills.
Ability and willingness to work both individually and as part of a team.
Must be open to working weekends and being on-call when needed.
Understanding of the Measuring Tape, Material Grade, Alloys, Miter Cuts, Fitting take-offs and interpretation of Blue Prints.
Understanding of Fittings and Layouts using the Pipefitters criteria.
Layout of Risers and Headers.
Oversee installation and completion of project assigned.
Must participate and successfully complete the Smith Driver’s Training system taught in house.
Insurance requirements.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees of organization.
Ability to calculate figures such as proportions, percentages, area, circumference, and volume.
Ability to apply concepts of basic algebra and geometry.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Valid driver's license.

Nice To Haves

Welding certification is preferred.
Hot work permit certification is a plus.
Forklift certification is a plus.

Responsibilities

Welding Preparation: Obtains specified electrode, based on criteria of raw goods being welded; inserts electrode into rod holder or feeds wire consumable through welding gun. Attaches ground clamp from welding machine to work piece, to dial in the adequate amperage, voltage, slope, and pulse, to known standards. Start engine driven welding machine / electric welding machine to produce desired amps. Scratch start arc to generate heat to produce a molten puddle, depositing filler metal from electrode to work piece; to join edges of work piece. Preheats work piece with hand torch or heating furnace where applicable. Positions and clamps work pieces together or assembles them in jig or fixture. Tacks/welds assemblies together.
Welding: Manually guides electrode or gun along beveled or fillet edge, maintaining length of arc and speed to form specified depth of fusion, width, and convex of weld on welded fixture, visually judged by color of base metal i.e. stainless, sound of weld, and size of molten puddle. Welds in flat, horizontal, vertical, overhead on plate; 6G on 2 inch pipe and a butt and branch on 12 inch pipe.
Post Welding Duties: Cleans slag of weld joint. Visually examines weld on i.e. bead size, bead crown convex/concave, porosity, and undercut according to AWS, ASME, API 1104 welding specifications. Repairs out of code equipment/raw goods, i.e. broken, cracked parts and fills cavity. Prepares parts for non-destructive testing (NDT); chips off excess weld, slag, and spatter.

Benefits

Medical/Dental/Vision/ Basic Life and AD&D/and other benefit options to meet your personal needs
Retirement: 401K with immediate matching contribution
Annual Discretionary Bonus
Generous Paid Time Off and Paid Holidays
Employee Assistance Program (EAP) – Free, confidential support for you and your dependents
On-Site fitness center
Wellness & Company Events throughout the year
Lodging (dependent on role)

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume