Robotic Operator B SSB1

PCC Talent Acquisition Portal • Clackamas, OR

5h

About The Position

MISSION The Robotic Operator will be responsible for system operation and upkeep. This includes but is not limited to: System Safety System Operation Intermediate Troubleshooting uses robot alarm screen and HMI Assigned Preventative Maintenance Area Cleanliness Communicate with operators, supervisors, maintenance, and technical staff PRINCIPAL ACCOUNTABILITIES System Safety Objective: The Robotic Operator will understand all system safety requirements and be responsible for keeping the cell in a safe working order. If an issue arises, the Robotic Operator will shut the system down and work with the supervisor, maintenance, and technical staff to resolve the issue Essential Job Functions: Understand and follow: Lock-Out/Tag-Out Procedures Confined Space Procedures General Plant and Department Safety Procedures Suggest safety system improvements to supervisor and technical staff. Identify and report safety problems to supervisor and technical staff. Including but not limited to: System Operation Preventative Maintenance Tasks Equipment Work Area System Operation Objective: Robotic Operator will be responsible for system operation Essential Job Functions: Basic System Operation Load/Unload Part Replace Consumables Scan Part/Lot and Operation Sequence Start Program Part Inspection Run Tool Center Point (TCP) Program Basic understanding of total system function Ability to trace issue to major peripheral system Monitor production process based on defined criteria in Technique Card(s). Basic Troubleshooting Objective: Will be capable of performing intermediate troubleshooting in order to maximize cell uptime. Essential Job Functions: Determine sub-system that is causing system failure. Intermediate Robot Troubleshooting: Jog Robot HOME Robot Identify and Recover Robot Faults Uses alarm screen and HMI Intermediate Vision System Troubleshooting: Identify and Recover System Failure Intermediate Process Troubleshooting: Identify conditions that caused process failure Preventative Maintenance Objective: Robotic Operator will be responsible for ensuring all assigned preventative maintenance tasks are performed in order to maximize cell uptime. Essential Job Functions: Perform assigned preventative maintenance tasks. Provide feedback to supervisor and technical staff. Area Cleanliness Keep work area free of debris. Verify tool boards are properly maintained. Report any issues to supervisor or technical staff. Communication Provide fault recovery feedback to operators. Communicate with supervisor or technical staff on suggestions to improve system performance or solve system issues. Assist maintenance staff with system operation when necessary. Complete logs and records . OTHER (MARGINAL ACCOUTABILITIES Perform other tasks as directed.

Requirements

• Ability to read and interpret Technique Cards, routings, and other special instructions.
• Ability to perform basic mathematical calculations (addition, subtraction, multiplication, division).
• Ability to communicate effectively both verbally and in writing.
• Ability to resolve problems and share information with others.
• Ability to work independently.
• Physical ability to perform the essential job functions including lifting or maneuvering objects weighing up to 50 pounds.
• Ability to work in difficult working conditions, which may include exposure to noise, dust, chemicals, and other elements for extended periods of time.

Nice To Haves

• Prior robotic experience strongly preferred but not required.
• Self-motivated.

Responsibilities

• System Safety
• System Operation
• Intermediate Troubleshooting uses robot alarm screen and HMI
• Assigned Preventative Maintenance
• Area Cleanliness
• Communicate with operators, supervisors, maintenance, and technical staff
• Understand and follow: Lock-Out/Tag-Out Procedures
• Understand and follow: Confined Space Procedures
• Understand and follow: General Plant and Department Safety Procedures
• Suggest safety system improvements to supervisor and technical staff.
• Identify and report safety problems to supervisor and technical staff.
• Basic System Operation
• Load/Unload Part
• Replace Consumables
• Scan Part/Lot and Operation Sequence
• Start Program
• Part Inspection
• Run Tool Center Point (TCP) Program
• Basic understanding of total system function
• Ability to trace issue to major peripheral system
• Monitor production process based on defined criteria in Technique Card(s).
• Determine sub-system that is causing system failure.
• Intermediate Robot Troubleshooting: Jog Robot
• HOME Robot
• Identify and Recover Robot Faults
• Uses alarm screen and HMI
• Intermediate Vision System Troubleshooting: Identify and Recover System Failure
• Intermediate Process Troubleshooting: Identify conditions that caused process failure
• Perform assigned preventative maintenance tasks.
• Provide feedback to supervisor and technical staff.
• Keep work area free of debris.
• Verify tool boards are properly maintained.
• Report any issues to supervisor or technical staff.
• Provide fault recovery feedback to operators.
• Communicate with supervisor or technical staff on suggestions to improve system performance or solve system issues.
• Assist maintenance staff with system operation when necessary.
• Complete logs and records
• Perform other tasks as directed.

What This Job Offers

• Job Type: Full-time
• Career Level: Entry Level
• Education Level: No Education Listed