Quality Inspector A (Non-Destructive Testing (NDT)

Airbus • Grand Prairie, TX

1d • Onsite

About The Position

Airbus Helicopters is looking for a Quality Inspector A (Non-Destructive Testing (NDT) to join our Quality team based in Grand Prairie, TX. Duties include utilizing NDT methods to inspect and/or certify compliance of materials, parts, products, components, assemblies or sub-assemblies and who must be qualified or certified in the following fields of activity: Magnetic Particle (MT), Fluorescent Penetrant (PT), Eddy Current (ET), and Ultrasonic (UT). Meet the team: From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen. Your working environment: A suburb just outside the Dallas-Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. Check out one of the seven professional sports teams that also call Dallas home - you may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Part Processing: 40% Applications of NDT methods allowing inspection and/or certification parts health concerning cracks. Understand and implement the work instructions in the for which they are qualified according to approved written instructions (Inspection Document (DI), technical sheet (FT), Work Card (CT), Inspection process sheet, etc.). Treat the parts, detail the results Carry out any preparation vital of the parts before or after test according to work instructions Carry out interpretations and evaluations of specific product or product type for acceptance or rejection, while following an approved instruction. Ensure areas to be inspected, the position of check phases and associated documents for the preparation of instruction files (DI), Technical Sheets (FT) and/or Work Cards (CT). Calibration/ Qualification of the room and equipment: 30% Maintain and calibrate NDT equipment Carry out the adjustment of the equipment items according to written instructions Collection of reference specimens Perform concentration checks Perform contamination checks Calibrate lamp illumination levels Count & Surface Preparation of Parts: 20% Validate inclusion parts required to be processed Degrease all parts by detergent wash and Ultrasonic Water rinse all parts with Ultrasonic Documentation: 10% Complete maintenance records Certify pass/fail for inspection of all parts Update SAP labor tracking Your boarding pass: Education: Required High School Diploma or equivalent experience Preferred Associate Degree or equivalent experience in aviation or industry related. National Aeronautical Standard (NAS) 410 level II certification course completion Experience: Required Minimum Five (5) years of confirmed experience doing NDT testing in at least two NDT methods Preferred Actively engaged in three or more NDT methods for five (5) years as a NAS 410 certified level II Licensure/Certifications: Required American Society of Non-destructive Testing (ASNT) and National Aerospace Standard (NAS 410) Level II NDT certification or equivalent certification from other countries’ corresponding agencies in at least two NDT methods. Preferred A&P license in addition to required licenses/certifications American Society of Non-destructive Testing (ASNT) and National Aerospace Standard (NAS 410) Level III NDT certification or equivalent certification from other countries’ corresponding agencies Travel Required: 5% Domestic and International Citizenship: Authorized to Work in the US Clearance: None Qualified Skills: Knowledge, Skills, Demonstrated Capabilities: Required: Be qualified to advise and perform inspections in the method Ability to demonstrate to the satisfaction of the Level III that they are familiar with and can perform the applicable examinations using suitable calibration blocks and written procedures prepared for examination of articles within the first 90 days. Be thoroughly familiar with the scope and limits of the method. Have the ability to apply detailed techniques to products or parts within the limitation of the qualifications requirements. Coordinate and report NDT results in a manner specified by the employing organization. Ability to read and understand technical and regulatory documentation. They must know the applications and limitations of the various NDT methods used to locate defects in aircraft structure and components. Preferred: None Physical Requirements: Onsite: 95% Vision: Able to pass an examination to ensure near vision of at least one eye, either corrected or uncorrected, such that the individual can read Snellen equivalent of 20/25 (Jaeger #1). The examination must be on a periodic basis, not to exceed 1 year. Able to distinguish and differentiate between colors necessary for the inspection method for which qualification is sought. Color vision testing need only be accomplished one time, usually at the initial vision examination. Able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings (daily) Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. (daily) Speaking: able to speak in conversations and meetings, deliver information and participate in communications. 10% of each day Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Consistently throughout the day Carrying: Consistently throughout the day Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Consistently throughout the day Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. Consistently throughout the day Sitting: able to sit for long periods of time in meetings, working on computer.10% of each day Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Consistently throughout the day Standing: able to stand for discussions in offices or on production floor. Consistently throughout the day Travel: able to travel independently and at short notice. Between shops as required. Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. Consistently throughout the day Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by task consistently throughout the day. Chemical exposure: able to be around chemicals required for NDT with required PPE in place on a daily basis

Requirements

• High School Diploma or equivalent experience
• Minimum Five (5) years of confirmed experience doing NDT testing in at least two NDT methods
• American Society of Non-destructive Testing (ASNT) and National Aerospace Standard (NAS 410) Level II NDT certification or equivalent certification from other countries’ corresponding agencies in at least two NDT methods.
• Be qualified to advise and perform inspections in the method
• Ability to demonstrate to the satisfaction of the Level III that they are familiar with and can perform the applicable examinations using suitable calibration blocks and written procedures prepared for examination of articles within the first 90 days.
• Be thoroughly familiar with the scope and limits of the method.
• Have the ability to apply detailed techniques to products or parts within the limitation of the qualifications requirements.
• Coordinate and report NDT results in a manner specified by the employing organization.
• Ability to read and understand technical and regulatory documentation.
• They must know the applications and limitations of the various NDT methods used to locate defects in aircraft structure and components.
• Authorized to Work in the US
• Able to pass an examination to ensure near vision of at least one eye, either corrected or uncorrected, such that the individual can read Snellen equivalent of 20/25 (Jaeger #1). The examination must be on a periodic basis, not to exceed 1 year.
• Able to distinguish and differentiate between colors necessary for the inspection method for which qualification is sought.
• Color vision testing need only be accomplished one time, usually at the initial vision examination.
• Able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings (daily)
• Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. (daily)
• Able to speak in conversations and meetings, deliver information and participate in communications.
• Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts.
• Consistently throughout the day Carrying
• Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Consistently throughout the day
• Able to push and pull small office furniture and some equipment and tools. Consistently throughout the day
• Able to sit for long periods of time in meetings, working on computer.
• Able to squat or kneel to retrieve or replace items stored on low shelving. Consistently throughout the day
• Able to stand for discussions in offices or on production floor. Consistently throughout the day
• Able to travel independently and at short notice. Between shops as required.
• Able to walk through office and production areas including uneven surfaces. Consistently throughout the day
• Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by task consistently throughout the day.
• Able to be around chemicals required for NDT with required PPE in place on a daily basis

Nice To Haves

• Associate Degree or equivalent experience in aviation or industry related.
• National Aeronautical Standard (NAS) 410 level II certification course completion
• Actively engaged in three or more NDT methods for five (5) years as a NAS 410 certified level II
• A&P license in addition to required licenses/certifications
• American Society of Non-destructive Testing (ASNT) and National Aerospace Standard (NAS 410) Level III NDT certification or equivalent certification from other countries’ corresponding agencies

Responsibilities

• Applications of NDT methods allowing inspection and/or certification parts health concerning cracks.
• Understand and implement the work instructions in the for which they are qualified according to approved written instructions (Inspection Document (DI), technical sheet (FT), Work Card (CT), Inspection process sheet, etc.).
• Treat the parts, detail the results
• Carry out any preparation vital of the parts before or after test according to work instructions
• Carry out interpretations and evaluations of specific product or product type for acceptance or rejection, while following an approved instruction.
• Ensure areas to be inspected, the position of check phases and associated documents for the preparation of instruction files (DI), Technical Sheets (FT) and/or Work Cards (CT).
• Maintain and calibrate NDT equipment
• Carry out the adjustment of the equipment items according to written instructions
• Collection of reference specimens
• Perform concentration checks
• Perform contamination checks
• Calibrate lamp illumination levels
• Validate inclusion parts required to be processed
• Degrease all parts by detergent wash and Ultrasonic
• Water rinse all parts with Ultrasonic
• Complete maintenance records
• Certify pass/fail for inspection of all parts
• Update SAP labor tracking

Benefits

• Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)
• Paid time off including personal time, holidays and a generous paid parental leave program.
• Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.
• Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.

What This Job Offers

• Job Type: Full-time
• Career Level: Entry Level
• Education Level: High school or GED
• Number of Employees: 5,001-10,000 employees