QAQC Inspector

United Integrated Services (USA) Corp.Phoenix, AZ
33dOnsite

About The Position

The QA/QC Inspector is responsible for conducting field inspections of various systems in industrial construction project, ensuring compliance with local, state, and federal codes. This role involves reviewing building plans, identifying non-compliance issues, documenting inspection results, and collaborating with contractors and city officials to uphold safety and quality standards. This is a full time onsite position located in North Phoenix, AZ (85027).

Requirements

  • Minimum 3–5 years of experience as an Electrical QAQC Inspector, Electrician, or Electrical Field Engineer.
  • Experience with fire alarm and low-voltage systems required.
  • Strong understanding of NEC, NFPA 72, NFPA 70, IPC/IMC, and related codes.
  • Ability to read and interpret construction drawings, one-lines, riser diagrams, and specifications.
  • Familiar with Smartsheet, BIM 360 / ACC, Bluebeam, Procore, Smartsheet's, Viewpoint, or similar platforms.
  • Knowledge of commissioning processes (FAT/SAT, integrated systems testing).
  • Strong documentation, photo capture, and reporting skills.
  • Ability to walk large industrial sites daily.
  • Ability to climb ladders, access elevated work areas, and navigate construction zones.
  • Ability to lift up to 40 lbs. occasionally.
  • Strong attention to detail.
  • Clear and concise communication.
  • Problem-solving mindset with the ability to identify root causes.
  • Ability to work independently and in coordination with teams.
  • High level of professionalism representing the GC to owner and inspectors.
  • Ability to work in cleanroom or sub-fab environments.
  • Willingness to work extended hours or weekends when required for testing or inspections.
  • Must pass background checks, safety orientations, and site-specific training.
  • Must comply with confidentiality and photography restrictions on the semiconductor site

Nice To Haves

  • Experience on large industrial, semiconductor, pharmaceutical, or mission-critical projects preferred.
  • Prior experience working with City of Phoenix or similar AHJ is a plus.
  • OSHA 30
  • NICET Level I–III (Fire Alarm Systems)
  • Journeyman or Master Electrician license
  • ASNT Level II (Visual) – optional
  • NFPA Fire Alarm Certification
  • BICSI Technician / Installer for low-voltage systems
  • CPR/First Aid

Responsibilities

  • Perform daily inspections for electrical installations, including conduit, cable tray, wire pulls, terminations, grounding/bonding, equipment installation, lighting, PDUs, panels, switchgear, and MCCs.
  • Verify compliance with NEC 2017, IBC/IFC, IMC/IPC (as applicable), ASHRAE, TSMC standards, and local amendments.
  • Confirm conductor types, sizes, tags, routing, and proper labeling are installed per drawings and project specifications.
  • Inspect grounding/bonding systems per NEC Article 250 and project requirements.
  • Inspect medium-voltage and low-voltage systems for correct installation practices.
  • Review torque logs, insulation resistance tests, megger results, and equipment functional tests.
  • Inspect installation of fire alarm devices, including pull stations, smoke detectors, heat detectors, beam detectors, duct detectors, horns/strobes, and tamper/flow switches.
  • Verify that wiring, junction boxes, device mounting, and labeling comply with NFPA 72, NFPA 70, and project specifications.
  • Witness and document fire alarm testing, including:
  • Device testing and mapping
  • Network communication tests
  • Power transfer testing (primary/secondary)
  • Acceptance testing with Fire Department and AHJ
  • Ensure fire alarm pathways are installed per code (Class A/Class B circuits).
  • Inspect and verify low-voltage installations such as:
  • Data, telecom, fiber optics
  • Access control
  • Security systems
  • Paging and mass notification
  • Review cable routes, separation requirements, and labeling per project drawings and standards.
  • Inspect cable testing results (OTDR, continuity, performance testing).
  • Prepare daily inspection reports with photos, comments, and status details.
  • Issue Non-Conformance Reports (NCRs) and track corrective actions.
  • Maintain up-to-date logs for inspections, deficiencies, re-inspections, and turnover packages.
  • Review contractor QAQC documentation, including checklists, test reports, as-built drawings, redlines, and equipment submittals.
  • Support creation and maintenance of Quality Turnover Packages (QTPs).
  • Work closely with field crews, superintendents, subcontractors, and engineers.
  • Coordinate inspections with City of Phoenix inspectors and third-party special inspectors.
  • Attend daily coordination meetings and integrate QAQC updates into trackers.
  • Support commissioning teams for electrical, fire alarm, and low-voltage systems.
  • Enforce electrical safety requirements (LOTO, arc flash, PPE, energized work rules).
  • Identify and report unsafe practices or conditions.
  • Ensure all work complies with TSMC safety policies and industrial cleanroom standards.
© 2024 Teal Labs, Inc
Privacy PolicyTerms of Service