PRODUCTION MACHINE LEVEL I

LISI Aerospace•Torrance, CA

13h•$20 - $25•Onsite

About The Position

The Production Machine Level I is to perform basic set-ups and operate production machines to achieve all company targets and standards. Must be able to run at least 3 production machines such as Trim, Tapping, Oval Lock, Assembly, Sorting and Roll ID. Production Machine I position must maintain the expected level of competency for production machines in accordance with skill assessments. ESSENTIAL DUTIES AND RESPONSIBILITIES .Other duties may be assigned. Reasonable accommodation for disabilities may be made for one or more of the following: Performs basic sets up and operates up to three automatic machines to produce parts according to blueprints, router package, specifications and/or special instructions. Recognizes and detects machine out-of-tolerance and adjust controls or control media as required. Performs basic trial runs to check accuracy of machine settings or programmed control data. Checks parts for conformance to specifications using gauges, SPC and shop floor system. Recognizes and remedies minor machine malfunctioning and in-process inspections. Major discrepancies are reported to lead or supervisor. Determines and performs proper feed and speed combinations. Provide necessary information to Manufacturing team, Engineering Team or others to document procedures and drawings. Performs work operations under supervision. Checks tooling and reworks as needed to keep machine running. Lays out parts for successive and continuous machining operations. Examine products to verify conformance to quality standards, by following blueprints or work instructions. Performs record keeping, data entry, housekeeping, and follows all safety regulations. Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures. Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times. Required to bring any known or suspected nonconformance for all company procedures or legal requirements to management’s attention immediately. Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results. Works under recommended waste elimination initiatives specifically related to the manufacturing production function such as recycling opportunities to elimination or minimize production waste. Performs a variety of other related duties as assigned. Ways of working, Experience, and Behaviors To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Collects and researches data; Uses experience to complement data; understands the workflows and procedures, production control, and knowledge of continuous improvement. Technical Skills – Understands and has working knowledge of the manufacturing production control and use of machinery operation process, procedures and function; use and understand basic computer entry and processing skills. Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquires regardless of the situation. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Places success of team above own interests; Able to build morale and group commitments to goals and objectives. Business Acumen - Understands business implications of decisions. Cost Consciousness - Works within directions of the department’s resources. Adaptability - Adapts to changes in the work environment; Adjust to production demand; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Planning/Organizing - Prioritizes and plans work activities of self and others; Uses time efficiently; Plans for resources in a creative way only adding cost as necessary; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Supervisory Responsibilities This position has no supervisory responsibilities.

Requirements

High school diploma or general education degree (GED).
Working experience of manufacturing environment procedures
Minimum of 1 - 3 years experience and/or training within an Aerospace fastener manufacturing &/or industrial shop; or equivalent combination of education and experience.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Must be able to effectively present information in one-on-one and small group situations to Team Members of the organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Knowledge of basic shop math.
Ability to calculate in all units of measure, using whole numbers, common fractions, and decimals.
Ability to perform these operations using units and weight measurement, volume, and distance.
Ability to comprehend detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
To perform this job successfully, an individual should have knowledge of basic computer skills and departmental applications: SPC & Shop Floor System.
The employee is frequently required to stand for extended periods of time, speak or listen, and walk.
The employee is frequently required to use eye-hand coordination, repetitive hand movement and manual dexterity use hands to finger, handle, or feel.
The employee must frequently bend, reach to shoulder level and lift, carrying, pushing and/or pulling up to 30 pounds.
Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus.
Hearing level within normal/average range.

Responsibilities

Performs basic sets up and operates up to three automatic machines to produce parts according to blueprints, router package, specifications and/or special instructions.
Recognizes and detects machine out-of-tolerance and adjust controls or control media as required.
Performs basic trial runs to check accuracy of machine settings or programmed control data.
Checks parts for conformance to specifications using gauges, SPC and shop floor system.
Recognizes and remedies minor machine malfunctioning and in-process inspections. Major discrepancies are reported to lead or supervisor.
Determines and performs proper feed and speed combinations.
Provide necessary information to Manufacturing team, Engineering Team or others to document procedures and drawings.
Performs work operations under supervision.
Checks tooling and reworks as needed to keep machine running.
Lays out parts for successive and continuous machining operations.
Examine products to verify conformance to quality standards, by following blueprints or work instructions.
Performs record keeping, data entry, housekeeping, and follows all safety regulations.
Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures.
Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times.
Required to bring any known or suspected nonconformance for all company procedures or legal requirements to management’s attention immediately.
Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results.
Works under recommended waste elimination initiatives specifically related to the manufacturing production function such as recycling opportunities to elimination or minimize production waste.
Performs a variety of other related duties as assigned.