Painter
About The Position
The Painter will facilitate the painting process for the facility ESSENTIAL DUTIES AND COMPETENCIES: Understand, adhere, and demonstrate to the company's commitment to QUALITY and SAFETY! Operate crane while adhering to safety regulations including but not limited to wearing a respirator and Tyvek coveralls at all times Ensuring all work accomplished prior to processing has been completed and inspected before starting work Ensuring all masking instructions have been incorporated and Quality verification has been accomplished prior to application of coatings Ensuring shelf life of coatings has not been exceeded prior to mixing and use Ensuring “time mixed, time sprayed, and pot life” of coatings are within specification requirements prior to application and recorded on the Shop Travelers Ensuring “time out of anodize, time mixed, time sprayed, pot life, time in and out of bake” are recorded on the Shop Traveler (as required by Quality Assurance) Ensuring test panels are available and coated with production parts (as required by specification and/or Quality Assurance) Ensuring each job which is oven cured has been correctly logged onto the oven chart, i.e. customer name, purchase order number, “AP” batch number (fuel tank coated parts) Verifying oven controllers are set at the correct curing temperature and the oven charts indicate the correct time in and time out Ensuring that environmental conditions such as temperature and humidity are compliant as specified on the shop traveler prior to painting application Understanding and proper use of applicable procedures, specifications, work instructions, etc. Ensuring control of nonconforming / age-controlled material in accordance with established procedures Experience with primer, fuel tank, and topcoat in aerospace manufacturing preferred Maintain regular and punctual attendance according to shift-times or a pre-arranged work schedule Available to work OT as needed Note : This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
Requirements
- Must understand, adhere, and demonstrate to the company's commitment to QUALITY and SAFETY!
- Note : This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
- Employees must be legally authorized to work in the United States.
- Verification of employment eligibility will be required at the time of hire.
- Visa sponsorship is not available for this position.
Nice To Haves
- Experience with primer, fuel tank, and topcoat in aerospace manufacturing preferred
Responsibilities
- Facilitate the painting process for the facility
- Operate crane while adhering to safety regulations including but not limited to wearing a respirator and Tyvek coveralls at all times
- Ensuring all work accomplished prior to processing has been completed and inspected before starting work
- Ensuring all masking instructions have been incorporated and Quality verification has been accomplished prior to application of coatings
- Ensuring shelf life of coatings has not been exceeded prior to mixing and use
- Ensuring “time mixed, time sprayed, and pot life” of coatings are within specification requirements prior to application and recorded on the Shop Travelers
- Ensuring “time out of anodize, time mixed, time sprayed, pot life, time in and out of bake” are recorded on the Shop Traveler (as required by Quality Assurance)
- Ensuring test panels are available and coated with production parts (as required by specification and/or Quality Assurance)
- Ensuring each job which is oven cured has been correctly logged onto the oven chart, i.e. customer name, purchase order number, “AP” batch number (fuel tank coated parts)
- Verifying oven controllers are set at the correct curing temperature and the oven charts indicate the correct time in and time out
- Ensuring that environmental conditions such as temperature and humidity are compliant as specified on the shop traveler prior to painting application
- Understanding and proper use of applicable procedures, specifications, work instructions, etc.
- Ensuring control of nonconforming / age-controlled material in accordance with established procedures
- Maintain regular and punctual attendance according to shift-times or a pre-arranged work schedule
- Available to work OT as needed
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Entry Level
Education Level
No Education Listed
