Painter I

LED FastStart•Holden, LA

19d

About The Position

An individual in this capacity can perform all of the functions listed below. The primary functions of this position consist of applying finish paint to the surfaces of the manufactured products such as body sides and cabs: repairing surface defects in the bodies or cabs, including the cleaning, grinding, filling and sanding of these surfaces: and applying a protective primer to these surfaces using a spray gun.

Requirements

Must possess a HS Diploma, GED or equivalent.
Must be able to read and understand English.
Strong work ethic / Be a team player.
Must be able to climb, twist, bend and stoop.
Must have use of hands and be able to work over-head.
Must be able to stand, squat, and grasp.
Must be able to lift up to 40 pounds.

Responsibilities

Performs preparation work prior to painting, such as repairing surface defects sanding and cleaning.
Applies masking tape or other material over parts and areas that are not to be coated
Mix paints and catalyst prior to applying, pouring coating liquid into pressure pot and connects gun to air hose.
Regulates the width and pressure of spray according to knowledge of painting technique and compliance spraying the work surface to apply prime or finish coat.
Cleans spraying equipment with solvent using proper personal protection and maintains a clean and safe work environment.
Cleans grease and dirt from product using various products depending on the situation.
Fills, grinds, and sans repaired surfaces, using power tools and hand tools.
Fills depressions with body filler, and may file dings to remove burrs and rough spots to attain smooth surface.
May prime or paint surfaces after performing body repair.
Visually examines and feels surface of work piece to achieve required results.
Performs other work as assigned.