P&C Field Technologist Assoc. - Sr.

American Electric Power•Canton, OH

7d•$31 - $53•Onsite

About The Position

P&C Field Technologist Assoc. - Sr.: What You'll Do: Test fundamental protection & control devices and equipment periodically and as required. Calibrate fundamental protection & control devices and equipment on a pre-established schedule and as required. Assist with switching at all voltage levels under the direction of the proper Dispatching Authority. Maintain test equipment in good working order. Maintain accurate records, reports and drawings as required. Operate a computer device to test, calibrate, and retrieve data from protection & control devices. Assist in the installation, maintenance, and operation of all relays, power line carrier sets, station SCADA, and associated communications equipment or cables as assigned. Troubleshoot and repair fundamental electromechanical relays. Troubleshoot and repair microprocessor-based relays at the card level, such as replacing power supplies, communications cards, I/O cards, etc. Assist with the diagnosis of equipment failures, protection mis-operations, and assist with corrective action to perform repairs and prevent recurrence. Ensure the circuitry, installation and operation of equipment is correct prior to placing equipment in service. Read electrical schematics and determine that the physical installation at the site is electrically equivalent to the schematic. Record test readings and results and determine they are within acceptable specifications and thus the physical installation will perform as per the design. Basic fault analysis: obtain oscillography data to determine if the protective devices operated as per their issued relay settings. Assisting a team in the installation, testing, and commissioning of new P&C systems for capital construction projects. Assist the on-site technical lead with directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project. Assist a trip testing team.

Requirements

P&C Field Technologist Assoc.: Education: Bachelor's degree in engineering in a program accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET) or a Bachelor's degree in engineering technology in a program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET). Experience: This is an entry level position for new graduates with a Bachelor's degree. Must successfully complete the Physical Abilities Test (PAT). Must be able to distinguish colors on a standard color blindness test.
P&C Field Technologist: Education: Bachelor's degree in engineering in a program accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET) or a Bachelor's degree in engineering technology in a program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET). Experience: Has typically acquired 2 or more years of related experience in work activities and projects requiring the application of engineering technology principles. Must successfully complete the Physical Abilities Test (PAT)
P&C Field Technologist Sr.: Education: Bachelor's degree in engineering in a program accredited by the Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET) or a Bachelor's degree in engineering technology in a program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (ABET). Experience: Has typically acquired 6 or more years of related experience in work activities and projects requiring the application of engineering technology principles Must successfully complete the Physical Abilities Test (PAT)
Working knowledge of current, potential, closing and trip circuits.
Working knowledge of material such as cable, lugs, and wire as applied to protective relay and control circuits.
Working knowledge of assembly, anchoring, and interchangeability of the various switchboard panel-support and through systems.
Must have the ability to read, understand, and correct electrical prints and diagrams and the ability to use hand tools.
Must demonstrate the ability to perform duties in an alert, safe, and business-like manner and the ability to deal with customers and other employees in a courteous and professional manner.
Ability to interpret, analyze and transmit facts graphically, orally, and in writing clearly and precisely.
Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law.
Considerable travel and overtime may be required to complete work assignments.
Ability to climb ladders and work at various heights above the ground in performance of the work
Must be able to distinguish colors on a standard color blindness test
Must be able to lift and carry required test equipment and tools.
Ability to work outdoors and in confined spaces, and to switch station equipment energized up to 765kV using the appropriate Personal Protective Equipment
Successful candidate must live or be willing to relocate within 45 minutes of the Canton Transmission Service Center (2755 Faircrest Street SW Canton, Ohio 44706)

Responsibilities

Test fundamental protection & control devices and equipment periodically and as required.
Calibrate fundamental protection & control devices and equipment on a pre-established schedule and as required.
Assist with switching at all voltage levels under the direction of the proper Dispatching Authority.
Maintain test equipment in good working order.
Maintain accurate records, reports and drawings as required.
Operate a computer device to test, calibrate, and retrieve data from protection & control devices.
Assist in the installation, maintenance, and operation of all relays, power line carrier sets, station SCADA, and associated communications equipment or cables as assigned.
Troubleshoot and repair fundamental electromechanical relays.
Troubleshoot and repair microprocessor-based relays at the card level, such as replacing power supplies, communications cards, I/O cards, etc.
Assist with the diagnosis of equipment failures, protection mis-operations, and assist with corrective action to perform repairs and prevent recurrence.
Ensure the circuitry, installation and operation of equipment is correct prior to placing equipment in service.
Read electrical schematics and determine that the physical installation at the site is electrically equivalent to the schematic.
Record test readings and results and determine they are within acceptable specifications and thus the physical installation will perform as per the design.
Basic fault analysis: obtain oscillography data to determine if the protective devices operated as per their issued relay settings.
Assisting a team in the installation, testing, and commissioning of new P&C systems for capital construction projects.
Assist the on-site technical lead with directing the activities of contract wireman and the activities of other P&C field personnel assigned to their project.
Assist a trip testing team.