Mold Maintenance Supervisor

Silgan Containers Corporation•Triadelphia, WV

66d

About The Position

MAJOR RESPONSIBILITIES: Work with human resources on staffing needs, including interviewing, hiring, training, discipline, terminating employees. Plan, assign and direct work; conduct performance reviews; develop, coach, and mentor team members; and work with human resources on personnel issues that arise. Ensure mold maintenance employees are compliant with company policy and federal and state labor laws. Work proactively with Manufacturing Manager and effectively coordinate mold changes, insert changes, and preventative mold maintenance schedule to minimize planned and unplanned downtime production issues. Communicate with Quality Assurance to determine customers' requirements and verify quality standards are being met. Ensure daily rundown information is being communicated to proceeding shifts and departments as needed. May provide input on new tool designs and work with Tooling Engineer on new and existing mold requirements. Assist and/or develop work instructions for special projects and new products. Maintain an organized, efficient spare parts inventory for all molds and hot runners and identify those parts deemed as critical and maintain acceptable level of spare parts. Maintain and lead safe and healthy work environment by following company safety procedures and complying with legal regulations as defined by OSHA. Instill safe work practices within the department Establish, lead, and maintain good housekeeping procedures within the department. Troubleshoot and diagnose mold issues. May be required to make replacement parts using tool room equipment. Disassemble mold and clean components. Inspect the mold for any signs of wear or damage. Look for worn or broken components such as springs, pins, bushings, switches, etc. Inform Maintenance Manager and/or Tool Room of any mold condition concerns. Assist with the direction of others in the department and under the direction of the Maintenance Manager, provide training/mentoring to Mold Maintenance Technicians. Collect molds after production runs. Examine last shot(s) and mold to see if repair is tagged "Needs Repair." Review QA Alerts and follow through on corrective action(s) as needed. Install replacement parts and perform minor mold repair activities (such as vent, polish, stone, wiring repairs, etc.). Assemble and test mold, attach a tag "Production Ready" verifying the work has been completed. Return the mold to the proper location. Act as the Backup-Supervisor when the Maintenance Manager is absent. May direct work of the Mold Maintenance Technicians Work closely with production and quality teams daily to understand, identify, and correct mold issues and production needs Assist supervisor to prioritize jobs and hand out work assignments Able to perform intermediate mold repairs (engrave cav. I.D., check a S.O. for accuracy, etc..) Able to trouble shoot intermediate electrical issues on molds Able to trouble shoot intermediate molding problems Able to train Mold techs at level 1&2 Track inventory of new and spare parts

Requirements

EDUCATION and/or EXPERIENCE: Minimum education is an associate's degree in a field related to plastics molding, Mold Maker Journeyman's certification, and 7-10 years of technical related experience; or an equivalent combination of education and experience is required.
Must possess strong leadership capabilities.
While performing the duties of this job, the employee is regularly required to stand and walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms; talk and hear.
The employee must occasionally lift and carry 50 lbs. (misc. equipment) for several feet.
Height of the 50 lb. object is from floor to waist height.
Must initiate push/pulling force of up to 40 lbs. and sustained force of up to 20 lbs. for up to 100 feet.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
The following personal protective equipment (PPE) is required to be always worn when performing in this role: safety glasses, steel toe shoes and hearing protection.
Food Safety protective equipment is always required while on the manufacturing floor: including hair nets, gloves and, if applicable, beard nets.

Responsibilities

Work with human resources on staffing needs, including interviewing, hiring, training, discipline, terminating employees.
Plan, assign and direct work; conduct performance reviews; develop, coach, and mentor team members; and work with human resources on personnel issues that arise.
Ensure mold maintenance employees are compliant with company policy and federal and state labor laws.
Work proactively with Manufacturing Manager and effectively coordinate mold changes, insert changes, and preventative mold maintenance schedule to minimize planned and unplanned downtime production issues.
Communicate with Quality Assurance to determine customers' requirements and verify quality standards are being met.
Ensure daily rundown information is being communicated to proceeding shifts and departments as needed.
May provide input on new tool designs and work with Tooling Engineer on new and existing mold requirements.
Assist and/or develop work instructions for special projects and new products.
Maintain an organized, efficient spare parts inventory for all molds and hot runners and identify those parts deemed as critical and maintain acceptable level of spare parts.
Maintain and lead safe and healthy work environment by following company safety procedures and complying with legal regulations as defined by OSHA. Instill safe work practices within the department
Establish, lead, and maintain good housekeeping procedures within the department.
Troubleshoot and diagnose mold issues. May be required to make replacement parts using tool room equipment.
Disassemble mold and clean components.
Inspect the mold for any signs of wear or damage.
Look for worn or broken components such as springs, pins, bushings, switches, etc.
Inform Maintenance Manager and/or Tool Room of any mold condition concerns.
Assist with the direction of others in the department and under the direction of the Maintenance Manager, provide training/mentoring to Mold Maintenance Technicians.
Collect molds after production runs.
Examine last shot(s) and mold to see if repair is tagged "Needs Repair."
Review QA Alerts and follow through on corrective action(s) as needed.
Install replacement parts and perform minor mold repair activities (such as vent, polish, stone, wiring repairs, etc.).
Assemble and test mold, attach a tag "Production Ready" verifying the work has been completed.
Return the mold to the proper location.
Act as the Backup-Supervisor when the Maintenance Manager is absent.
May direct work of the Mold Maintenance Technicians
Work closely with production and quality teams daily to understand, identify, and correct mold issues and production needs
Assist supervisor to prioritize jobs and hand out work assignments
Able to perform intermediate mold repairs (engrave cav. I.D., check a S.O. for accuracy, etc..)
Able to trouble shoot intermediate electrical issues on molds
Able to trouble shoot intermediate molding problems
Able to train Mold techs at level 1&2
Track inventory of new and spare parts