Metrology Tech III

Hellerman Tyton•Milwaukee, WI

1d•Onsite

About The Position

Under the direction of the Metrology Lead, Metrology Tech III is responsible for conducting various inspections, dimensional measurements, and performance tests to support product development, manufacturing, quality assurance, and compliance. The Metrology Tech III will work in a lab environment utilizing equipment including but not limited to- CMM’s, CT machines, vision systems, laser scanners, tensile testers, water baths, ovens, scales, force gauges, calipers, gage pins, height gages, and moisture testers. The Metrology Tech III will be responsible for documenting and communicating results as well as supporting the management of test samples. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Read and interpret advanced drawings. Perform visual inspections, dimensional measurements, and performance tests while following standards and procedures.Program and operate CMM’s, CT, Laser Scanners, Micro-Vu and Keyence vision systemsCreate custom fixtures for various measurement systems to accurately measure partsProgram and order 3d Printed Fixtures from Additive manufacturing department using available software’sConduct inspections, measurements, and mechanical tests using tensile testers, water baths, ovens, scales, force gauges, calipers, gage pins, height gages, vision systems, and moisture analyzers.Offer suggestions or ideas for product test set up Help mentor Metrology Tech I’s and II’s.Cut and cross section parts as needed for CT scanning.Photograph product, test set ups, failure modes, etc.Identify failure modes and potential root causes.Record results, defects, deviations, etc. in detailed reports or control software.Navigate and utilize software such as JDE, SQC Pack, and EQMS.Communicate effectively and in a professional manner- both verbally and in writing.Prepare Report pages for Calypso and Gom/Zeiss inspection software’sOrganize, prioritize, and multi-task daily activities to support project priorities.Manage test samples.Keep a clean and organized work environment. Other Functions: Maintain knowledge and understanding of relevant department standards, procedures, and best practices.Contribute to the company and department goals and objectives.Support work instruction development for inspection and testing.Identify innovative approaches to working more effectively and efficiently.Assist in training as needed.Actively participate in learning and self-improvement.Other duties as assigned. Success in this role will require Perform visual inspections, dimensional measurements, and functional/mechanical testing.Properly operate and understand all functions of test and inspection equipment/gages.Vision/optical comparator systems experience requiredCMM experience required.Vision (Keyence/Inspec) system experience requiredCT (Zeiss Inspect/Gom) experience preferredHandheld laser Scanner (Hawk 2) Experience preferredInspection software Programming (Zeiss Inspect, Gom Inspect) experience preferredAbility to read advanced part drawings and interpret design, performance, and customer specifications or requirements.Accurately inspect and measure products using appropriate tools.Ability to identify failure modes and potential root causes.Consistently deliver accurate, complete, and on-time reports and records of results.Demonstrate understanding and proper execution of inspection and test standards, procedures, best practices, etc.Demonstrate understanding and proper use of software such as JDE, SQC Pack, and EQMS.Basic knowledge of APQP documents, Statistical Process Control, and PPAP'sWork efficiently and respond constructively when faced with challenges.Communicate in a professional manner.Take responsibility for your continuous development and performance improvement.Strive to carry out the "Customers First" quality policy in all aspects of the job.Build and maintain effective internal/external relationships.Possess a positive attitude and collaborative spirit.Respect others and work with integrity and good ethics.Operate in accordance with HellermannTyton policies and procedures; Demonstrate conduct that aligns with the HT Code of ExcellenceWork safely; adhere to safety laws, regulations, standards, and practices.

Requirements

Perform visual inspections, dimensional measurements, and functional/mechanical testing.
Properly operate and understand all functions of test and inspection equipment/gages.
Vision/optical comparator systems experience required
CMM experience required.
Vision (Keyence/Inspec) system experience required
Ability to read advanced part drawings and interpret design, performance, and customer specifications or requirements.
Accurately inspect and measure products using appropriate tools.
Ability to identify failure modes and potential root causes.
Consistently deliver accurate, complete, and on-time reports and records of results.
Demonstrate understanding and proper execution of inspection and test standards, procedures, best practices, etc.
Demonstrate understanding and proper use of software such as JDE, SQC Pack, and EQMS.
Basic knowledge of APQP documents, Statistical Process Control, and PPAP's
Work efficiently and respond constructively when faced with challenges.
Communicate in a professional manner.
Take responsibility for your continuous development and performance improvement.
Strive to carry out the "Customers First" quality policy in all aspects of the job.
Build and maintain effective internal/external relationships.
Possess a positive attitude and collaborative spirit.
Respect others and work with integrity and good ethics.
Operate in accordance with HellermannTyton policies and procedures; Demonstrate conduct that aligns with the HT Code of Excellence
Work safely; adhere to safety laws, regulations, standards, and practices.
Minimum Associate’s degree or five (5) years of equivalent experience in Metrology.
Experience using test and measurement equipment.
Technical/print reading skills.
Advanced print reading skills.
Basic math and computer skills.
Software skills in Microsoft Word, Excel, and PowerPoint.
Strong verbal and written communication skills.
Motivated with strong problem-solving skills.
Detail orientated and organized.
Professional and service orientated.
Ability to work independently and in a group environment.
Pass Ishihara Color Vision Test or advise if color deficient
This job frequently requires the employee to sit, stand, crouch, bend over to lift, and walk for periods of time.
This job also requires the employee to hear, talk, have good vision, and good manual dexterity.
Ability to lift/push/pull up to 50lbs.
Wearing Personal Protective Equipment is required.
Ability to work overtime on weekdays to meet the needs of the department and customers.

Nice To Haves

CT (Zeiss Inspect/Gom) experience preferred
Handheld laser Scanner (Hawk 2) Experience preferred
Inspection software Programming (Zeiss Inspect, Gom Inspect) experience preferred
Knowledge of GD&T is preferred.
Experience using Zeiss Inspect and/or Calypso preferred
Experience with Injection Molds preferred

Responsibilities

Read and interpret advanced drawings.
Perform visual inspections, dimensional measurements, and performance tests while following standards and procedures.
Program and operate CMM’s, CT, Laser Scanners, Micro-Vu and Keyence vision systems
Create custom fixtures for various measurement systems to accurately measure parts
Program and order 3d Printed Fixtures from Additive manufacturing department using available software’s
Conduct inspections, measurements, and mechanical tests using tensile testers, water baths, ovens, scales, force gauges, calipers, gage pins, height gages, vision systems, and moisture analyzers.
Offer suggestions or ideas for product test set up
Help mentor Metrology Tech I’s and II’s.
Cut and cross section parts as needed for CT scanning.
Photograph product, test set ups, failure modes, etc.
Identify failure modes and potential root causes.
Record results, defects, deviations, etc. in detailed reports or control software.
Navigate and utilize software such as JDE, SQC Pack, and EQMS.
Communicate effectively and in a professional manner- both verbally and in writing.
Prepare Report pages for Calypso and Gom/Zeiss inspection software’s
Organize, prioritize, and multi-task daily activities to support project priorities.
Manage test samples.
Keep a clean and organized work environment.
Maintain knowledge and understanding of relevant department standards, procedures, and best practices.
Contribute to the company and department goals and objectives.
Support work instruction development for inspection and testing.
Identify innovative approaches to working more effectively and efficiently.
Assist in training as needed.
Actively participate in learning and self-improvement.
Other duties as assigned.