Masker - Aerospace

Accurus Aerospace•Tulsa, OK

18h•Onsite

About The Position

Maskers ensure the application of painting or other coatings is exact - precisely what our customers require. Maskers review blueprints to accurately identify the prep work needed for processing parts, and they apply masking (tape, paper, plugs) to prevent the application of paint or other processing on surfaces that shouldn't be coated. Maskers verify part cleanliness and damage-free surfaces to ensure product quality and customer satisfaction.This position is classified as safety-sensitive. Essential FunctionsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Reads and interprets blueprints to determine required work procedures and identify materials required Using cleaning fluids, solvents, brushes, scrapers, sandpaper, cloth, and/or steam, cleans surfaces of workpieces in preparation for coating Follows established work instructions and safety procedures including the proper use of all required personal protective equipment (PPE) and the use, storage, and disposition of hazardous materials Uses precision measuring tools such as calipers or other gauges to determine areas needed for masking according to blueprints or drawings Uses precision cutting tools such as x-acto style blades/knives to accurately shape masking materials, including tiny materials and hard-to-reach areas requiring manual dexterity with sometimes very limited access Applies masking or other such materials to ensure surfaces are protected during processing procedures Rinses, drains, and/or wipes coated workpieces to remove excess coating material or to facilitate the setting of finish coats on workpieces Demasks and cleans parts as required after coatings or processes have been performed, paying close attention to ensure masking materials applied were correct and adequate in meeting customer/drawing requirements Perform other incidental duties as may be required Regular attendance on-site at the workplace is required

Requirements

A high school diploma or GED equivalent is required
Experience in precision masking or similar is preferred
Experience reading and interpreting blueprints; experience interpreting finish specs is preferred
Precise dexterity and the ability to apply masking in small places and to make precise cuts using an X-acto or similar pointed blade is required
Hand strength and stability to effectively and accurately use precision cutting instruments is required

Responsibilities

Reads and interprets blueprints to determine required work procedures and identify materials required
Using cleaning fluids, solvents, brushes, scrapers, sandpaper, cloth, and/or steam, cleans surfaces of workpieces in preparation for coating
Follows established work instructions and safety procedures including the proper use of all required personal protective equipment (PPE) and the use, storage, and disposition of hazardous materials
Uses precision measuring tools such as calipers or other gauges to determine areas needed for masking according to blueprints or drawings
Uses precision cutting tools such as x-acto style blades/knives to accurately shape masking materials, including tiny materials and hard-to-reach areas requiring manual dexterity with sometimes very limited access
Applies masking or other such materials to ensure surfaces are protected during processing procedures
Rinses, drains, and/or wipes coated workpieces to remove excess coating material or to facilitate the setting of finish coats on workpieces
Demasks and cleans parts as required after coatings or processes have been performed, paying close attention to ensure masking materials applied were correct and adequate in meeting customer/drawing requirements
Perform other incidental duties as may be required
Regular attendance on-site at the workplace is required