Lineman C - Lineman A

American Electric Power•Henderson, TX

3d•$35 - $53

About The Position

Perform all types of work involved with the installation, rearrangement, maintenance, operation, removal and inspection of electrical transmission and distribution facilities. All items apply to overhead and underground, as applicable. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The Lineman A builds upon the skills, abilities and knowledge learned as a Lineman B (or equivalent). RESIDENCY REQUIREMENT: Successful candidate must reside within 30 minutes of the Henderson Service Center. What You’ll Do: Essential Job Functions and Tasks Assemble, install, maintain, remove and competently inspect underground facilities, conductors, fixtures, structures and other associated equipment on de-energized and grounded overhead and underground facilities under immediate or general supervision. During the first six months in this classification, shall be capable of working on conductors and equipment energized up to 260 volts under general supervision. Assist with work on conductors and equipment energized at secondary voltages to 600 volts under immediate supervision of higher classification. After six months in this classification, shall be capable of working on conductors and equipment energized up to 600 volts under general supervision. Use volt-amp meters, ground meggers, continuity testers and other electrical test equipment associated with line work on voltages up to 600 volts. Apply various kinds of insulating protective equipment on facilities energized only at voltage qualified to work on. Under direct supervision, the employee may operate cutouts, line switches, reclosers, and other sectionalizing devices, refuse line and transformer devices, test de-energized lines and equipment, and place or remove grounds. During this time frame, the employee may progress from direct supervision to immediate and finally general supervision as skill level dictates. Build and erect equipment mountings (such as regulator and transformer platforms) and build overhead transformer installations. Conduct proper tagging procedures while performing switching of energized circuits. Perform inspection and trouble-shooting of lines. Perform similar or less skilled work as assigned.

Requirements

Lineman C Education requirements are listed below: High School Diploma or equivalent
Lineman C Work experience requirements are listed below: Minimum of one year distribution electrical power line work experience, OR one year of related line experience defined as: successful completion of a one year electrical power line school certificate plus a minimum of 16 weeks internship or distribution electrical power line experience, or an Associate degree from an electrical power line school which includes a minimum of 16 weeks internship or distribution electrical power line experience.
Lineman C Licenses/Certifications: Valid Class A CDL is required
Lineman C Other: Shall have performed the duties of and have all the qualifications of Lineman D or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Lineman A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification. A physical abilities assessment is also required for this position.
Lineman B Education requirements are listed below: High school diploma or GED
Lineman B Work experience is listed below: Minimum of 2 years of work experience as Lineman C or the equivalent experience as determined by the Company
Lineman B Licenses/Certifications: Valid Class A CDL is required
Lineman B Other: Shall have performed the duties of and have all the qualifications of Lineman C or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Lineman A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification. A physical abilities assessment is also required for this position.
Lineman A Education Requirements Listed Below: High school diploma or GED
Lineman A Work Experience is listed below: Successful completion of apprentice lineman training, including B-200 certification written test with a score of 80% or higher and successful completion of hands-on comprehensive demonstrations. External candidates must have a minimum of 4 years line work experience and successful completion of the journeyman pre-assessment.
Lineman A Licenses/Certifications: Valid Class A CDL is required.
Lineman A Other: Shall have performed the duties of and have all the qualifications of Lineman B or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. A physical abilities assessment is also required for this position.

Responsibilities

Assemble, install, maintain, remove and competently inspect underground facilities, conductors, fixtures, structures and other associated equipment on de-energized and grounded overhead and underground facilities under immediate or general supervision.
Work on conductors and equipment energized up to 260 volts under general supervision during the first six months.
Assist with work on conductors and equipment energized at secondary voltages to 600 volts under immediate supervision of higher classification.
Work on conductors and equipment energized up to 600 volts under general supervision after six months.
Use volt-amp meters, ground meggers, continuity testers and other electrical test equipment associated with line work on voltages up to 600 volts.
Apply various kinds of insulating protective equipment on facilities energized only at voltage qualified to work on.
Operate cutouts, line switches, reclosers, and other sectionalizing devices, refuse line and transformer devices, test de-energized lines and equipment, and place or remove grounds under direct supervision.
Build and erect equipment mountings (such as regulator and transformer platforms) and build overhead transformer installations.
Conduct proper tagging procedures while performing switching of energized circuits.
Perform inspection and trouble-shooting of lines.
Direct the work of employees assigned to assist
Perform similar or less skilled work as assigned.

Benefits

In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume