Line Mechanic D-A

American Electric Power•Wayne, WV

1d•$27 - $53

About The Position

Assist in performing work involved with the installation, rearrangement, maintenance, operation, removal, and inspection of electrical transmission and distribution facilities; drive and operate line trucks and associated auxiliary equipment. All job duties apply to overhead and underground equipment and facilities. This position is posted in a range from Line Mechanic D-A This job requires "recommended" results on the HireVue Line Worker Virtual Job Tryout—an untimed online assessment that typically takes about 45 minutes; all applicants will be automatically invited, but employees already in the Line progression are exempt and may disregard the request; see the Employment Test Prep section at https://www.aep.com/careers/testprep/ for details. The selected candidate will need to reside within 45 mins of the Wayne Service Center (691 Craig Road, Wayne WV)

Requirements

High school diploma or GED
Must possess and maintain a valid state driver's license.
Employee shall obtain appropriate licensing as required by federal and/or state law prior to the end of the designated probationary period.
Must acquire CDL beginners permit within 60 days.
Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.
Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification.
High school diploma or GED
Valid Class A CDL is required
Shall have performed the duties of and have all the qualifications of Line Mechanic D or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company.
A physical abilities assessment is also required for this position.
High school diploma or GED
Valid Class A CDL is required
Shall have performed the duties of and have all the qualifications of Line Mechanic C or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company.
A physical abilities assessment is also required for this position.
High school diploma or GED
Valid Class A CDL is required
Shall have performed the duties of and have all the qualifications of Line Mechanic B or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company.
A physical abilities assessment is also required for this position.

Nice To Haves

Line work experience or line school education is preferred.

Responsibilities

Assist with the assembly, installation, maintenance, removal and competently inspect underground facilities, conductors, fixtures, structures and other associated equipment on de-energized and grounded overhead and underground facilities under direct or immediate supervision.
Demonstrate the ability to competently perform ground person duties under immediate or direct supervision as skill level dictates.
Assist with loading, unloading, handling, maintaining, installing and removing poles, towers and structures.
Demonstrate the ability to operate Company equipment (with exception of digger/derricks and aerial lift vehicles), climb poles, ladders and structures, and work on de-energized conductors and equipment.
Assemble and install Line Material and hardware under direct or immediate supervision
Use and store hand lines, tie knots and demonstrate a basic working knowledge with ropes and rigging equipment inspection and use.
Splice primary and secondary overhead wires using the proper tools, hardware and equipment (including crimping and compression tools).
Inspect and maintain tools, equipment and work area in a safe, clean and orderly fashion
Identify, inspect, use and maintain all classes of rubber gloves and sleeves(PIPE), and insulating blankets, hoses and covers(IPE).
Inspect, maintain, organize, operate and stock company vehicles, equipment and tools.
Perform housekeeping duties as assigned.
Report irregularities and abnormal conditions.
Safely execute pole top rescue and bucket truck rescue processes as training is completed
Protect or control work area.
Set and remove barricades, flags, signs, cones and associated equipment.
Maintain accurate records and submit accurate reports as required.
Correctly read and record information and registered readings on analog or digital Kilowatt-hour meters.
Complete Monthly Apprentice Cards and submit to local supervision for review.
Perform similar or less skilled work as assigned.
Assemble, install, maintain, remove and competently inspect overhead, and underground facilities including conductors, cables, transformers, fixtures, structures and other associated equipment under immediate or general supervision as skill level dictates.
Test, de-energize and ground URD cable, Splice and terminate URD cable, and troubleshoot, repair and energize URD cable and equipment under immediate or general supervision as skill level dictates.
Use volt meters, amp meters, ground meggers, continuity testers and other electrical test equipment associated with line work on voltages up to 600 volts.
Build and erect equipment mountings (such as regulator and transformer platforms) and build overhead transformer installations.
Conduct proper tagging procedures while performing switching of energized circuits
Perform inspection and trouble-shooting of lines.
Direct the work of employees assigned to assist.
Assemble, install, maintain, remove and inspect conductors, fixtures and other associated equipment on overhead and underground facilities.
Install and operate cutouts, line switches, reclosers and other sectionalizing devices; re-fuse line and transformer devices; test de-energized line or equipment, and place or remove grounds.
Install, maintain and switch residential and commercial underground distribution facilities.
Locate and correct trouble using cable-locating and fault finding tools and equipment.
Install and maintain multiple street light circuits.
Install three-phase transformer banks on poles, aerial or ground-mounted platforms.
Install three-phase regulator banks and energize or remove them from service, Install, maintain, operate and remove capacitor banks from service.
Connect, check phase rotation, parallel and check voltage on single and three-phase transformer installations.
Locate and correct faults and hazardous conditions on lines and/or equipment.
Prepare, conduct and facilitate safety meetings.
Install and maintain transmission and distribution facilities and all types of line equipment on the most congested types of construction, energized or de-energized.
Operate cutouts, line switches, reclosers and other sectionalizing devices; re-fuse line and transformer devices; change line and transformer taps; phase out and/or parallel circuits.
Select proper standard drawings and interpret specifications and proceed with all new construction work and live line work without supervision.
Make energized cut overs from old poles and equipment to new or temporary installations.
Work with live line equipment on energized circuits for emergency repairs or routine modifications of facilities.
Obtain, issue, accept and release transmission and distribution clearances or permits in accordance with established switching and tagging procedures.
Instruct customers regarding meter or service locations, and advise customers regarding service interruptions related to customers' electrical equipment.
Assist employees of equal or higher classification.

Benefits

In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume