Guidance, Navigation, Controls (GNC) Engineer (Remote)

TSC • Arlington, VA

10d • Remote

About The Position

TSC is seeking a remote based Guidance, Navigation, Controls (GNC) Engineer that will design, integrate, test, and deliver flight control systems or mission-critical onboard software for unmanned aerial systems (UAS). The ideal candidate will have experience in UAS Guidance, Navigation, & Control (GNC) utilizing inertial navigation, vision, collision avoidance, commercial autopilots, redundancy management and path planning architecture. The GNC Engineer will participate hands-on in the full software life cycle, from concept through implementation, integration to flight test and operational release. This will be a remote based position with up to 25% travel required. As a GNC Engineer you can anticipate some of your day-to-day responsibilities to include: Work on a team to develop, modify and tune guidance and control systems for fixed wing aircraft Work on a team to develop, modify and tune navigation systems based on sensor fusion of 6-DOF IMU, magnetometer, GNSS, pressure and ranging sensors. Work on a team to develop and modify 6-DOF and Hardware-in-the-Loop simulation environments Simulation, analysis, control, and testing on 6 degree-of-freedom (6-DOF) motion platform for development and validation of autonomous UAS. Work on a team to design and develop flight or mission-critical onboard software for unmanned systems Aid development for unmanned aerospace includes guidance, navigation & control, mission sequencing, payload control, redundancy and contingency management, uplink and downlink packet encoding and decoding, converting between different serial protocols, hardware-in-the-loop simulation, ground-based GUIs, and aircraft subsystem control (i.e., payload, electrical systems) Embedded Software development (C/C++, Python, shell scripts) Writing/modifying software to adjust flight behaviors: Use development tools such as: JIRA, git, C/C++, CMake, Linux, MATLAB Collaborate with a multi-disciplinary software team on large, multi-language projects Participating in code reviews, Flight Testing, and Customer Presentations Bench test, Hardware-in-the-loop, and field testing of UAS platforms Local, interstate, and international travel to support field testing and customer demonstrations. Expected travel is ~10-25%. Collaborate with other engineering disciplines (Systems, Software, Mechanical, Electrical) in planning, design and development of systems to ensure software and hardware performance and compatibility Design software architecture, interfaces, and gateways for communication with external Autonomy software services. Implement functionality using a model-based approach. Software verification and validation including writing Test Cases and Test Procedures Develop, implement, and document data and software application test plans to validate project deliverables meet quality standards Oversee and support processes and procedures for existing data and reporting activities to support internal and external customer deliverables. Examples of specific deliverables include but are not limited to: recurring reports and analyses; data validation and documentation Interface and derive solutions in coordination with hardware design teams

Requirements

• BS degree in Mechanical, Electrical, Computer, Aerospace, Controls engineering or other relevant discipline, plus at minimum ten years of experience in a professional environment developing MATLAB / Simulink control systems with auto code experience; or MS in Controls or Aerospace Engineering plus 2 years’ experience. Embedded code experience preferred.
• US Citizenship and the ability to obtain and maintain a DoD Security Clearance
• Experience in developing physics based 6 DOF simulations, motion platforms.
• Experience developing with: Gazebo or similar simulation tools, MatlabMATLAB/Simulink, C, C++, Python
• Experience developing scripts to run batch processes
• Experience in data post processing from simulation or flight testing, report summary writing
• Experience developing guidance and autonomy algorithms required; in denied environments preferred

Nice To Haves

• Minimum two years of demonstrated, hands-on professional experience in at least one (ideally a combination) of the following areas:
• Model-based design and/or test using the Simulink/Stateflow tool chain.
• Software development in a relevant subject matter area: Aircraft Guidance Navigation & Control or other robotic system guidance, navigation and control; ground- or airborne mission systems; general aerospace flight control or cockpit avionics systems; ground stations; payload control.
• Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces.
• Familiarity with software configuration management tools, version control systems, defect tracking tools, and peer review required.

Responsibilities

• Work on a team to develop, modify and tune guidance and control systems for fixed wing aircraft
• Work on a team to develop, modify and tune navigation systems based on sensor fusion of 6-DOF IMU, magnetometer, GNSS, pressure and ranging sensors.
• Work on a team to develop and modify 6-DOF and Hardware-in-the-Loop simulation environments
• Simulation, analysis, control, and testing on 6 degree-of-freedom (6-DOF) motion platform for development and validation of autonomous UAS.
• Work on a team to design and develop flight or mission-critical onboard software for unmanned systems
• Aid development for unmanned aerospace includes guidance, navigation & control, mission sequencing, payload control, redundancy and contingency management, uplink and downlink packet encoding and decoding, converting between different serial protocols, hardware-in-the-loop simulation, ground-based GUIs, and aircraft subsystem control (i.e., payload, electrical systems)
• Embedded Software development (C/C++, Python, shell scripts)
• Writing/modifying software to adjust flight behaviors:
• Use development tools such as: JIRA, git, C/C++, CMake, Linux, MATLAB
• Collaborate with a multi-disciplinary software team on large, multi-language projects
• Participating in code reviews, Flight Testing, and Customer Presentations
• Bench test, Hardware-in-the-loop, and field testing of UAS platforms
• Local, interstate, and international travel to support field testing and customer demonstrations. Expected travel is ~10-25%.
• Collaborate with other engineering disciplines (Systems, Software, Mechanical, Electrical) in planning, design and development of systems to ensure software and hardware performance and compatibility
• Design software architecture, interfaces, and gateways for communication with external Autonomy software services.
• Implement functionality using a model-based approach.
• Software verification and validation including writing Test Cases and Test Procedures
• Develop, implement, and document data and software application test plans to validate project deliverables meet quality standards
• Oversee and support processes and procedures for existing data and reporting activities to support internal and external customer deliverables. Examples of specific deliverables include but are not limited to: recurring reports and analyses; data validation and documentation
• Interface and derive solutions in coordination with hardware design teams

Benefits

• TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level