Energy Systems Technician

Schreiber Foods•Mount Vernon, MO

67d

About The Position

The Energy Systems Technician performs all maintenance work as assigned by the Maintenance Planner and/or the Maintenance Lead or Advisor according to the specifications as outlined in applicable Visual Work Instruction and proactive maintenance techniques. The Energy Systems Technician will be primarily responsible for work on the energy systems (ammonia/cooling systems, boiler/steam systems, and compressed air systems). Additionally, the Energy Systems Technician is responsible for responding to calls when needed. The Technician performs each assignment using the appropriate replacement parts and coordinates the schedule for the work with the Maintenance Team Leader and production leadership as needed. The Technician performs work to maximize process reliability and minimize negative impacts on production schedules. Technician Levels & Electives: Level 2 - Experienced technician with abilities to independently perform, document, and train others in areas of expertise on maintenance activities as assigned. Can apply learned skills and utilize tools to improve equipment reliability. Electives - Electives are specialty areas that a partner may develop advanced skills. Electives may be requested or required based on the skills and interests of the mechanic in areas that fulfill company needs or requirements. Partners proficient in certain electives may be asked to train others in those areas and will be assigned work requiring the elective skill set. Most positions require general proficiency at level 1 for elective areas.

Requirements

Level 2 Ramsey test with a passing score.
Pass Ramsay B&R Test Level 2
Pass all Learning Log Assignments
Pass off B&R Level 2 check sheet
Boiler 1 School
Ammonia 1 School
6m skills
Hands-On Testing
Troubleshooting test (simutech)
Ordering Parts
Print Reading
improvement Project
Successful Leader Eval
Visual Work Instruction, eAM, MS Office Products (Outlook, Excel, Word, PowerPoint), PDF Reader, Snipping Tool, and other applicable software as needed or required by position.
This position will require maintenance knowledge and or experience.
3 years minimum Energy Systems experience.
Must be able to perform at the described skill level in order to attain and retain the level certification. Continued learning to achieve certification or required skills and abilities as dictated by company needs required to attain and retain level certification.
The ability to communicate with leadership, vendors, contractors, other maintenance partners, line operators via phone, fax, email, text, and person-to-person
Overtime can be expected if the workload requires it. Overtime can be expected when other Maintenance partners are away from work.
The position will require continuous advancement of technical knowledge and skills. Applicants must demonstrate success in training courses and will be expected to actively participate in assigned or elected training courses to refresh fundamental skills and match technology needs within the company.
The position will require the ability to multi-task and the ability to shift priorities quickly.
Testing Required - Applicants must pass the company's testing requirement for maintenance positions and local plant tests for maintenance jobs.
Applicants must also meet all other Schreiber bid qualifications.

Responsibilities

Perform all process CP, CCP, QP, and CQP checks required for the position. Follow reaction plans for Food Safety, Food Quality and customer requirement deviations. Be able to identify and understand customer requirements and assist in assuring proper production operation.
Must follow Good Manufacturing Practices and good housekeeping guidelines. Must follow safety guidelines, wear designated Personal Protective Equipment, conform to regulatory requirements and assure Food Safety measures are followed.
The Technician performs maintenance work within the allocation of time needed to complete. All work performed and parts used will be documented in the CMMS.
Modifies, fabricates, and upgrades to plant equipment following process change procedure or MOC if applicable. Performs identified corrective work as assigned.
Implements and completes preventive maintenance tasks. Uses preventive and predictive maintenance techniques and tools to generate corrective work requests and improve equipment reliability.
Conducts troubleshooting and repair activities.
Identifies parts, supplies, and tools needed for follow up corrective work or as needed.
Tracks and reports pertinent performance metric information to assist in creating action plans and improvement ideas based on the tracking data.
Continues training as directed for certification levels and to stay current in maintenance techniques.
Communicate with plant leadership, vendors, contractors, other maintenance partners, and line operators to coordinate work and resolve issues.
The ability to train basic level peers in elective or other areas as assigned.
Perform peer to peer technical training in areas of expertise as assigned or required.
Ability to train operators on advanced equipment care and operation as assigned or required.
Assign parts to work orders, read and interpret failure codes, follow-ups, use of personal devices or scanners if applicable.
Performs work in applicable systems in compliance with VWI's.
Demonstrate general computer and word processing skills. Ability to document VWI's for common work activities as needed.
Ability to create and run personalized searches in the CMMS software.
Use of power tools, tap and die, volt/multi-meter, soldering iron, bearing heater, laser alignment tool, infrared, ultrasonic, Megger to identify and correct machine issues.
Follows OEM or VWI instructions for fastener selection.
Repair and trouble shoot basic systems.
Ability to read pneumatic and hydraulic schematics.
Can demonstrate the ability to properly change out bearings and seals.
Follow established lubrication tasking using appropriate tools (grease caddy, ultrasonic unit, or volumetric grease gun) to apply correct lubrication.
Detect wear, initiate corrective work request, and perform corrective maintenance prior to catastrophic failure.
Ability to correctly identify and prevent lubrication related failures.
Ability to troubleshoot and repair motors and transmissions.
Ability to detect servo position and resolve general servo fault conditions
Demonstrate and use trouble shooting tools such as: Various meters, HMI's, ultrasonic, schematics, and others as needed for required equipment repairs throughout the facility.
Ability to identify and correct mechanical, basic electrical and electromechanical, and basic instrumentation problems.
Troubleshoot using schematics or blueprints.
Ability to specify correct alternative part using parts data and specifications in addition to P&IDs, schematics, blueprints or other appropriate documents.
Understanding and troubleshooting of electrical and controllers.
Under the guidance of an Electronic Tech who knows the code and is giving instructions, performs basic electrical task as assigned.
Ability to read P&ID schematics.
Ability to distinguish or identify standard sensors and other instrumentation.
Ability to change out failed like for like common electrical or instrumentation parts independently. Ability to change out more complex parts using VWI's, Electronic Tech instructions, or OEM documentation.
Perform preventative and predictive or condition-based monitoring activities as assigned.
Ability to identify and correct mechanical wear.
Demonstrated ability to identify root cause for failure and improve PM/PdM to improve critical equipment reliability
Ability to repair dryers and air compressors, Boilers
Ability to repair guards, shields, brackets, area equipment as assigned or needed.
Fabricate parts according to supplied drawings or schematics where applicable.
Demonstrate ability to arc weld, MIG and TIG weld, oxy/acet. weld meeting requirements by food safety zone.
Be an officer on Hazwoper team, CPR, First Aid if qualified and requested to fill an available position on the team.
Use of precision tools, proper setup of lathe and mill.
Recognize and follow OEM tolerance and material recommendations.
Has general knowledge of main electrical feeds and can use the one line drawing to isolate or locate major electrical components or panels.
Has general knowledge of main water supply feeds, backflow preventers, main water shut off, and branch isolation valves.
Has general knowledge of plant fire system and area zones, system triggers, and most common faults.
Can locate and read trouble codes on panels. Can communicate codes effectively and provide basic reset commands via telephone if needed or assigned
Uses and applies Oracle eAM and generates reports that can be used in budget planning, work planning, and other similar functions.

Benefits

A 401(k) plan that includes up to an 8 percent Schreiber match and has been recognized as Best-in-Class for companies with 5,000-plus employees.
Competitive medical, prescription drug, dental and vision benefits without a waiting period, including second-opinion medical consultation with specialists
Wellness resources, including a fitness reimbursement program and access to an interactive personalized online wellness program
Paid vacation and holidays
Professional growth and development opportunities through training and our Education Assistance Program
Childcare costs. Get up to $5,000 annually to help you with the cost of childcare. Monthly contributions toward childcare expenses, including independent babysitters.

Stand Out From the Crowd

Upload your resume and get instant feedback on how well it matches this job.

Upload and Match Resume