Commercial Engine Line Inspector

MTU Maintenance Fort Worth • Fort Worth, TX

1d

About The Position

MTU Maintenance Fort Worth is part of the world’s largest independent jet engine MRO company based in Germany providing aftermarket and OEM-licensed engine maintenance services worldwide. As a part of MTU Aero Engines, with over 80 years of experience in the design, development, and production of jet engine components, modules, and engines; MTU Maintenance is a global network of over 4,000 employees with over 35 years of experience in the MRO market. MTU provides maintenance from targeted hospital visits to complete overhauls on over 30+ commercial aero engine and industrial gas turbine lines and has completed more than 18,000 shop visits for over 1,400 customers worldwide. Within this Global network, MTU Maintenance Dallas provides hospital shop and on-site maintenance services. Aviation Parts and Process Inspector (DAT) The inspector will be responsible for the inspection of engines, engine parts, sub-assemblies, and accessories in accordance with FAA approved technical data or instructions. This includes but is not limited to Receiving, In-Process and Final Inspections.

Requirements

• Demonstrated interpersonal skills in working and communicating effectively with all levels in the organization.
• Exceptional organizational skills and attention to detail.
• Problem-solving mindset and a proactive, creative approach to challenges.
• Demonstrated proficiency with Microsoft Office, Web applications, and general technical data, including ESM, AMM, SB’s.
• FAA Airframe and Powerplant (A&P) certification preferred, Powerplant required.
• Prior experience with engine maintenance, engine changes, engine inspections and module removal & installation required.
• Must be able to sit at a desk and work on a computer.
• Must be able to lift up to 40 pounds at times.

Nice To Haves

• Preferring experience with the following engines: CFM 56 CF34 CF6 PW2000 & PW4000 & GTF V2500 LEAP GE90

Responsibilities

• The inspector will perform complete inspection of components, sub-assemblies, and assemblies, using approved types of measuring instruments, and inspection equipment.
• The inspector is responsible for verifying the execution, inspection, and successful completion of the work performed.
• The inspector should ensure all work-scope instructions, quality and regulatory requirements are complied with.
• All inspection personnel must maintain proficiency in the use of various types of inspection aids, tools and gages routinely used for inspection of each item undergoing inspection.
• Maintain detailed records of maintenance activities, including inspections, repairs, and parts replacements in compliance with regulatory requirements.
• Complete maintenance logbooks and documentation accurately.
• The inspector must ensure that all calibrated tools have current calibration and consumable materials being used are within their listed shelf life and have not expired.
• Assist in the conduct of investigations into incidents or discrepancies in maintenance procedures, identify root causes, and implement corrective actions to prevent recurrence.
• To ensure compliance with the applicable title 14 CFR parts, inspection personnel are required to be thoroughly familiar with all inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of airworthiness of an article undergoing maintenance, repair, or alteration.
• Inspection personnel must remain current on requirements and how to find data contained in 14 CFR Parts 1, 43, 65 and 145.
• The maintenance being performed may be controlled by the requirements of 14 CFR Parts 91, 121, 125, 135, and all maintenance must be accomplished per the operator’s program requirements.
• Perform other duties as may be directed by the Quality, Safety, Engineering Manager, Chief Inspector or Lead Inspector.
• Experienced A&P Licensed or P Licensed Technician to perform shop-level work both in the MTU Maintenance shop and in the field, domestically and internationally, as job scopes warrant.
• Job duties include a large range of maintenance from service bulletin and AD compliance to inspections and Level one repairs.
• Individuals must maintain a high level of performance and integrity and be an effective team player with leadership potential.
• Individuals should have experience with Borescope inspections, top and bottom case compressor repairs, module removal and installation, engine change and QEC, AD and SB modifications, hot section replacements and repairs, configuration change, fan blade replacement, and lease return inspections.
• Shop level maintenance required.
• Understands and can comply with the FAA and EASA requirements of return to service engines and aircraft
• Comply with FAA, EASA, and Company Policies and procedures
• Ability to learn as well as teach others on work scopes
• Assist engineers in testing and troubleshooting equipment
• Conduct heavy lifting of equipment and materials
• Use precision measuring instruments such as micrometers and calipers to ensure accuracy
• Maintain and update equipment records in the Computerized Maintenance Management System (CMMS)
• Assist in general shop maintenance tasks as needed
• Willingness to take responsibility and work overtime as required
• Work as a team member

Benefits

• Medical, Dental, Vision, and STD insurance are effective immediately
• Medical Flexible Spending Accounts
• Employer-paid LTD and Life / AD&D insurance
• 401k with employer matching up to 2% with an additional discretionary contribution to 1% provided from the employer
• Paid 2 weeks of Vacation, paid 10 days of PTO & Holidays
• Annual Tuition Reimbursement
• Monthly $30 Gym Membership Reimbursement
• Passport and renewal compliance, and TSA reimbursement
• Employee Assistance Program

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: No Education Listed
• Number of Employees: 5,001-10,000 employees