B Class Fitout Tradesman (Joiner)

Austal USA•Mobile, AL

4d•$31•Onsite

About The Position

Prefab accommodation cabins, toilet blocks, and various compartments with minimal supervision Mark out, make cutting list, blocking and bracketing and install bulkheads and side linings Install various types of furniture using blueprints with minimal supervision Lay out and install ceiling ramps and tiles in accordance with drawings Hang internal fitout doors including all locks and hold backs Lay out and install all types of external fitout items Assist in building and installing pads Assist in installing metal Run straight pipe coverings and lag it out with minimal supervision Lay out and shoot pins with minimal supervision Measure, cut, and install duct Drill holes in accordance with drawings Install dampers, valves, and diffuser with minimal supervision Understand the principals of interior painting and be able to accomplish same

Requirements

One (1) year marine or equivalent construction experience OR two (2) years’ marine experience or equivalent construction experience
Demonstrated knowledge of practices, methods, materials, and equipment used in cabinet making, carpentry, industrial insulation and HVAC
Basic mechanical skills and trades mathematics
Ability to read mechanical drawings and blueprints
Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA: 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Responsibilities

Perform all tasks and responsibilities associated with Trades Assistant status
Prefab accommodation cabins, toilet blocks, and various compartments with minimal supervision
Mark out, make cutting list, blocking and bracketing and install bulkheads and side linings
Install various types of furniture using blueprints with minimal supervision
Lay out and install ceiling ramps and tiles in accordance with drawings
Hang internal fitout doors including all locks and hold backs
Lay out and install all types of external fitout items
Assist in building and installing pads
Assist in installing metal
Run straight pipe coverings and lag it out with minimal supervision
Lay out and shoot pins with minimal supervision
Measure, cut, and install duct
Drill holes in accordance with drawings
Install dampers, valves, and diffuser with minimal supervision
Understand the principals of interior painting and be able to accomplish same