Aviation Non-Destructive Inspector - Kingsville, TX

V2X Current Openings•Kingsville, TX

25d•Onsite

About The Position

Essential Duties and Accountabilities: Non-destructively inspect aircraft, engines, support equipment, components, and accessories iaccordance with Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBIs), Technical Directives (TDs), maintenance Requirements Cards (MRCs), Navy instructions, manufacturer's manuals, schematics, company instructions and other approved data. Maintains efficiency logs and records in accordance with COMNAVAIRFORINST 4790.2 Series. Coordinate with supervision and quality control -to resolve questions concerning serviceability and/or repair procedures. Assist with ordering parts, tools, materials and equipment as required. Document work accomplished on Maintenance Actions Forms (MAF) or work orders in OOMA System. Thorough knowledge of corrosion detection and review. Maintain cleanliness of the work center and around your assigned work areas. Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations including participation in FOD walk down when directed. Responsible for adhering to the company tool control program. Will be required to perform simple computer inputs and extractions. Comply with established general and industrial safety rules and regulations as applicable to the contract, facilities and job assignment. Perform corrosion control cleaning, prevention, and treatment as required. Perform preventative maintenance on assigned shop and support equipment. Comply with established hazardous material/waste program and Local, State, and Federal Environmental Protection Agency regulations. May be required to perform off-site services on assigned detachments. Perform maintenance in support of Depot level Qualification Standards: During the last five (5) years, must have a minimum of three (3) years recent aircraft and component non-destructive inspection experience in inspection techniques in eddy current and at a minimum meet NAS 410 Level II certification requirements. A working knowledge of aircraft, engine and aviation related support equipment. Will work with other shops to meet their requirements. Familiarization with COMNAVAIRFORINST 4790.2 Series and other applicable Navy instructions, Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdown (IPBs), manufacturer's manuals and company instructions, Quality Management Systems defined by ISO Standards. Maintain knowledge of material safety data sheet and applicable safety precautions. Must have a valid state operator's license and be able to pass the Government licensing requirements. Must be knowledgeable in handling and disposing of hazardous material/waste. Must be able to read, speak, write legibly and understand the English language. May be required to become Aircraft and Support Equipment Wheel and Tire qualified and certified. Must be able to provide the following documents before hire: Original NDI certification documentation Total inspection hours performed for each method, and Any other certification for methods Physical Demands: This classification activity is usually accomplished in a hangar and shop environment and as such requires the scope of physical movements and postures normally associated with bending, stooping and climbing ladders. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. Work Environment: The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to changes in temperature and weather. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.

Requirements

During the last five (5) years, must have a minimum of three (3) years recent aircraft and component non-destructive inspection experience in inspection techniques in eddy current and at a minimum meet NAS 410 Level II certification requirements.
A working knowledge of aircraft, engine and aviation related support equipment.
Familiarization with COMNAVAIRFORINST 4790.2 Series and other applicable Navy instructions, Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdown (IPBs), manufacturer's manuals and company instructions, Quality Management Systems defined by ISO Standards.
Maintain knowledge of material safety data sheet and applicable safety precautions.
Must have a valid state operator's license and be able to pass the Government licensing requirements.
Must be knowledgeable in handling and disposing of hazardous material/waste.
Must be able to read, speak, write legibly and understand the English language.
May be required to become Aircraft and Support Equipment Wheel and Tire qualified and certified.
Must be able to provide the following documents before hire: Original NDI certification documentation Total inspection hours performed for each method, and Any other certification for methods
NDI Level II or greater
Formal or Specialized Training/Equivalent
Valid State Driver’s License
Hazardous Waste Communications Training
FOD and TCP Awareness Trained
Security Clearance Awareness Training
COMNAVAIRFORINST 4790.2 Program Awareness
ISO 9001-2000 Program Awareness
NALCOMIS Trained
Ground Support Operator Certified
Tire and Wheel Certification #
Operational Risk Management (ORM) Training
Collateral Duty Inspector (may be required) #

Responsibilities

Non-destructively inspect aircraft, engines, support equipment, components, and accessories iaccordance with Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBIs), Technical Directives (TDs), maintenance Requirements Cards (MRCs), Navy instructions, manufacturer's manuals, schematics, company instructions and other approved data.
Maintains efficiency logs and records in accordance with COMNAVAIRFORINST 4790.2 Series.
Coordinate with supervision and quality control -to resolve questions concerning serviceability and/or repair procedures.
Assist with ordering parts, tools, materials and equipment as required.
Document work accomplished on Maintenance Actions Forms (MAF) or work orders in OOMA System.
Maintain cleanliness of the work center and around your assigned work areas.
Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations including participation in FOD walk down when directed.
Responsible for adhering to the company tool control program.
Will be required to perform simple computer inputs and extractions.
Comply with established general and industrial safety rules and regulations as applicable to the contract, facilities and job assignment.
Perform corrosion control cleaning, prevention, and treatment as required.
Perform preventative maintenance on assigned shop and support equipment.
Comply with established hazardous material/waste program and Local, State, and Federal Environmental Protection Agency regulations.
May be required to perform off-site services on assigned detachments.
Perform maintenance in support of Depot level Qualification Standards