Accessory Shop Mechanic

Segers Aero Corporation•Fairhope, AL

3d•Onsite

About The Position

Segers Aero Corporation located in Fairhope, AL is hiring a Accessory Shop Mechanic to join our team. We offer a competitive benefits package and a 9/80 work schedule with every other Friday off. Apply today! Do you need Transportation? If so, please click link: https://www.aidt.edu/aidt-transportation-request/ [https://urldefense.proofpoint.com/v2/url?u=https-3A__www.aidt.edu_aidt-2Dtransportation-2Drequest_&d=DwMFAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=BvJFuZJ11pPunhlJZYahDmAhNe9PG5G_CIUPKhYoVZI&m=eQZ52u8v_QugOddKZQAEk__HzNZy_nPCOBbheQc5nNBqAgkgqsnELoGPonpp_DWV&s=g8pEBxZZqyieHNyjLtDpu_dWOrR6N4Mz2Vs-RHMTWvA&e=] Purpose of Position: To perform maintenance on all customers’ aircraft and engine accessories following company policies, SOPs and Repair Station Manual Essential Functions: (must be able to perform these functions, with or without a reasonable accommodation). Acquires information from production boards, reports and any other additional information given by supervisor and/or lead for daily/weekly production goals Locates the accessory work order from the assigned production rack Properly logs into ETS using the correct operation code Reviews the work scope as directed by Sales upon induction Locates the correct manual and tooling equipment to completed evaluation Reviews and interprets the overhaul manual(OHM) to accurately diagnose the defect listed identified by Sales or adhere to the correct engine work scope and/or customer SOP Completes preliminary inspection: Inspect unit for any incoming damages or numerical errors (part/serial numbers, descriptions, status etc.) as well as missing or incorrect parts received. Inform lead of any discrepancies found. Bench test unit as applicable to confirm report from Sales/Customer. Properly disassembles the until according to the overhaul manual; using the correct tooling equipment required and following any standard aviation procedures/practices Visually inspects piece parts for any defects listed by the overhaul manual and/or any aviation standard practice Measures any item indicated by the inspection section using micrometers, calipers and/or any other approved measuring equipment Assigns the correct routing for any rework item by completing the required IW in accordance with the company standards Accurately logs inspection report into company specific software and completes the unit’s evaluation Completes any final calibrations/testing required per the overhaul manual with the Accessory Shop Quality Inspector, as required. Ensures the all piece parts, tags and paperwork are properly identified and completed for Final Inspection Properly preserves the unit in accordance with the overhaul manual or standard aviation practices as required. Ensures units are properly mounted on shipping boards if required Ensures caps, plugs, covers, and tags (e.g. WARNING and CAUTION tags) are properly installed before shipping Maintains a clean workstation free from Foreign Object and/or Debris (FOD), ensures tooling is properly stored Maintains a clean/safe workspace free from spills or obstruction which may lead to harm Travels as required Confers with lead/supervisor to recommend changes such as: equipment utilization, production methods and procedures to increase efficiency of department and promote improvement Attends all safety and health training, as required, in a timely manner Works when scheduled and complies with company attendance policy Works overtime as needed Other duties as required Observes and practices all safety procedures and personal policies (e.g. Safety-glasses, ear plugs, face shields etc.)

Requirements

Must provide and maintain tool box in accordance with Segers’ Tool Control Plan
Must be proficient in using a variety of hand tools, special tools, and GSE required to perform assigned maintenance tasks
Must be able to maintain an effective working relationship with, and among co-workers and supervisors
Must be able to work with little or no supervision and to take initiative
Must be able to use applied knowledge to formulate positive solutions to problem situations
Must be able to apply common sense
Must be able to effectively read, write and communicate in English
Must be proficient in company specific software
Must be able to add, subtract, multiply and divide, using fractions and decimals; compute percentages, ratios, rates and interpret graphs
Must be able to comply with OSHA requirements and standards to properly wear all applicable PPE
Must have knowledge of precision measuring tools/equipment (dimensional and electrical)
Must be able to lift and carry up to 50 lbs. regularly and more, with assistance occasionally
Must regularly be able to reach overhead
Must regularly be able to squat, bend, twist, stoop, kneel, and stand
Must be able to walk around regularly using steps occasionally
Must be able to see within normal range of vision with or without corrective lenses
Must be able to hear running machinery
Must be able to use hands, wrists, and fingers repetitively
Must have exceptional hand-eye coordination
Ability to provide verifications of US citizenship or permanent residency to satisfy ITAR/EAR restrictions
At least 18 years of age or older.
High School Diploma or GED is required.
1 year of professional mechanical aviation experience or completion of Aviation School is required. 3 years of experience performing maintenance on components in an MRO environment is preferred.
Must pass a criminal background check and DOT-FAA pre-employment drug screen. Position is considered safety-sensitive in accordance with DOT and FAA regulations.
Subject to drug and alcohol testing per DOT FAA’s regulations.

Nice To Haves

A&P license or FAA Power Plant Rating preferred.
Must strive to continuously develop skills and pursue training opportunities.

Responsibilities

Acquires information from production boards, reports and any other additional information given by supervisor and/or lead for daily/weekly production goals
Locates the accessory work order from the assigned production rack
Properly logs into ETS using the correct operation code
Reviews the work scope as directed by Sales upon induction
Locates the correct manual and tooling equipment to completed evaluation
Reviews and interprets the overhaul manual(OHM) to accurately diagnose the defect listed identified by Sales or adhere to the correct engine work scope and/or customer SOP
Completes preliminary inspection: Inspect unit for any incoming damages or numerical errors (part/serial numbers, descriptions, status etc.) as well as missing or incorrect parts received. Inform lead of any discrepancies found.
Bench test unit as applicable to confirm report from Sales/Customer.
Properly disassembles the until according to the overhaul manual; using the correct tooling equipment required and following any standard aviation procedures/practices
Visually inspects piece parts for any defects listed by the overhaul manual and/or any aviation standard practice
Measures any item indicated by the inspection section using micrometers, calipers and/or any other approved measuring equipment
Assigns the correct routing for any rework item by completing the required IW in accordance with the company standards
Accurately logs inspection report into company specific software and completes the unit’s evaluation
Completes any final calibrations/testing required per the overhaul manual with the Accessory Shop Quality Inspector, as required.
Ensures the all piece parts, tags and paperwork are properly identified and completed for Final Inspection
Properly preserves the unit in accordance with the overhaul manual or standard aviation practices as required.
Ensures units are properly mounted on shipping boards if required
Ensures caps, plugs, covers, and tags (e.g. WARNING and CAUTION tags) are properly installed before shipping
Maintains a clean workstation free from Foreign Object and/or Debris (FOD), ensures tooling is properly stored
Maintains a clean/safe workspace free from spills or obstruction which may lead to harm
Travels as required
Confers with lead/supervisor to recommend changes such as: equipment utilization, production methods and procedures to increase efficiency of department and promote improvement
Attends all safety and health training, as required, in a timely manner
Works when scheduled and complies with company attendance policy
Works overtime as needed
Other duties as required
Observes and practices all safety procedures and personal policies (e.g. Safety-glasses, ear plugs, face shields etc.)

Benefits

Three weeks of vacation
10 Paid Holidays
401(K) plan that includes an employer matching program
BlueCross BlueShield PPO medical plan
Dental and Vision (company-paid benefit for employee coverage)
Short Term and Long-Term Disability (company-paid benefit)
Basic Life/AD&D (company paid benefit / 2x base salary amount)
Supplemental Life/AD&D coverage options
Spouse & Child Life coverage options
Flexible Spending Account (Medical & Dependent Care options)
Employee Assistance Program (company-paid, includes three free counseling sessions)
Telehealth Program (24/7 phone or online video doctor visits)
LifeLock (Identity Alert System)
And more!