Electrics Rework Technician, X-Plant

Airbus•Mobile, AL

1d•Onsite

About The Position

Airbus US Manufacturing Facility is looking for a Rework Electrics Technician to join our X-Plant department based in Mobile, AL. FAL X-Plant Technicians are tasked with actively participating in preparation for and operational execution of Outstanding Work- from minor rework through to complex rework & repair activities within their skills and Qualification profile (Electrical & Mechanical, or, Structures & Mechanical). This work is carried out throughout the FAL and Flightline phases. Responsible for non-standard work in Mobile FAL which includes but is not limited to Outstanding Work from Europe Plant Partners, Non-Conformities and snag sheets raised during standard FAL activities, Customer findings recorded in Quality Log Book, and Technical Log Book write ups during Flight Line and Delivery Phases. High level of skill and flexibility required to ensure FAL and Flight Line milestones are achieved while operating at the highest level of Safety, Quality, Cost, and schedule adherence. You will be trained and qualified to work across multiple competencies in order to provide optimum support to Mobile FAL and Flight Line Operations. FAL XPlant Technicians coach, train and mentor FAL & X-Plant team members to further enhance their Airbus production system knowledge, skills and development. Acts as a trainer for new processes, initiatives and is a bastion of Safety and Quality within the team. A high degree of work schedule flexibility and autonomy is needed in this position. This includes shifts and weekend working. After a learning and training period, you will become a Delegated Inspector and hold privileges in multiple Airbus Plant and supplier systems.

Requirements

High School Diploma/ GED.
Completed vocational training ( Mechanics/System/Avionics/Electrical).
2 + years of experience in related fields.
2 years minimum experience in Aircraft systems and electrical rework or equivalent.
Delegated Inspector (After Training and Qualification Period).
Minimum of 2, X-Plant or FAL Station PDR's fully complete, current and hold corresponding WA's/QA's, (Structures and Mechanical or Electrical & Mechanical cross trained). PDR's and associated WA's and QA's must be maintained (After Training and Qualification Period).
Knowledge of Hand, Power Tools, Cutting Tools, etc. related to Airbus Manufacturing.
Willingness to learn and cross-skill within multiple functions and competencies.
Ability to work across different teams to coordinate and complete activities.
Demonstrated ability to problem solve.
Knowledge of station safety, quality, FOD, and OSHA Regulations.
High degree of flexibility, including shift.
Excellent communication skills.
Work preparation and M.E processes.
Effective verbal and written communication skills English.
G Suite.
Skilled in SAP and IT tools.
Must be able to work Autonomously and be self driven.
Must be able to create and adapt plans to meet deadlines on Safety, Quality and time.
Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings.
Hearing: Able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms.
Speaking: Able to speak in conversations and meetings, deliver information and participate in communications.
Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts.
Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools.
Sitting: Able to sit for long periods of time in meetings, working on the computer.
Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving.
Standing: Able to stand for discussions in offices or on the production floor.
Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces.
Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site.
Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor.
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Nice To Haves

Completed vocational training (Aircraft electrics, avionics and Systems).
5+ years hands-on experience in the Aviation industry.
May need to travel to Europe from time to time for training in new manufacturing processes.
Able to travel independently and at short notice.

Responsibilities

Perform non-standard work that includes but is not limited to electrical system rework, wire changes, harness changes, electrical bonding, crimping, pinning, splicing, systems exchanges, component/equipment changes, painting, sealing, and troubleshooting.
Perform Self Inspections in line with Qualification profile and Work Order requirements.
Perform Delegated Inspections in line with Qualification profile, inspection planning and Work Order requirements.
Work in an autonomous and self-directed team to secure milestones for Mobile FAL and Flight Line.
Work in compliance with production orders, design documents, concessions, and inspection procedures.
Work in conjunction with engineering support to define rework or repair solutions and to carefully review all work orders, drawings, instructions, and procedures.
Occasionally assist FAL Operations with standard activities performed out of station.
Coordinate with various FAL Functions to safely and securely access aircraft for non-standard work.
Able to isolate limited systems in order to safely perform non-standard work.
Flexibility to perform works in non-standard areas such as at height, confined space, and wet-tank entry while following all safety protocols and OSHA Regulations.
Document tasks in accordance with Airbus procedures and specifications.
Use a variety of standard and specialized hand tools, power equipment, measuring devices, and test equipment in completing work assignments, and jigs/fixtures with associated license, such as but not limited to: Overhead Crane Cherry-Picker Scissor Lift Fork Lift Lifting Platform
Follow all OSHA, Safety, and Environmental Regulations.
Prepare for complex rework/repairs as a key part of the Working Party MFT.
Embody complex rework/repair solutions in accordance with defined engineering dossier and planning.
Identify risks and help mitigate through Working Party planning and review routines.
Contribute to planning adaptation within the MFT.
Support and guide station setup needs to ensure safe working conditions are implemented and maintained throughout complex rework/repair Working Party for people & Aircraft.
Actively contribute and lead continuous improvement and problem solving actions (PPS) linked to the complex rework/repair.
Performs OJT, coaching and actively participates in the development of the X-Plant and FAL teams.
Perform other duties as assigned.
Contribute to the growth of the X-Plant Multi-Functional Team by training other team members and being trained across multiple competencies.
Maintain Personal Development Record for work performed.
Actively participate in the development and continuous improvement of A320 Family Aircraft Assembly and Testing using Airbus Operating System Tools.
Participate in process improvement, root cause analysis, 5S, and all applicable tools improving work load, quality, safety, and increasing efficiency.
Promote and have an active role and detailed knowledge of specific Airbus procedures such as but not limited to: Foreign Object Debris Procedure (FOD). OEM Standards. Plant and Constituent Assembly Service Level Agreements and Processes. Tool Control.
Follow and encourage safety by using applicable PPE and following and exceeding safety requirements.
Maintain cleanliness of X-Plant Shop including free stock bins, consumable locations, and work areas.
Participate in daily SQCDP Talks to discuss day to day activity and priorities.
Timely and concurrent sign-off work within specified work orders, non-conformities, and SAP systems.
Identify and raise non-conformities in SAP systems.
Report details of tasks and input/output of work directly to Leads and Management by means of Production Pace Control System.

Benefits

Competitive base salary
incentive compensation which may include profit sharing schemes
retirement savings plan
Employee Stock Ownership Plan (“ESOP”)
Paid time off including personal time
holidays
generous paid parental leave program
Comprehensive insurance coverage including medical (traditional and high-deductible health plans)
prescription
dental
vision
life
disability
Employee Assistance Plan (“EAP”)
other supplemental benefit coverages
Upskilling and development opportunities through our global Leadership University
unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path
opportunity to participate in accelerated development programmes
both national and international mobility